Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-11-01 → 2025-11-30 |
| TT | Health-based | Resolved | 2025-11-01 → 2025-11-30 |
| TT | Health-based | Resolved | 2025-11-01 → 2025-11-30 |
| TT | Health-based | Resolved | 2025-10-01 → 2025-10-31 |
| TT | Health-based | Resolved | 2025-10-01 → 2025-10-31 |
| TT | Health-based | Resolved | 2025-10-01 → 2025-10-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2024-02-01 → 2024-02-29 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 131 µg/L 10% of the EPA limit 1300 µg/L
worst single sample: 158 µg/L | 49/50 | SYR4 | 2012–2017 |
| Nitrate-Nitrite | 1369 µg/L 14% of the EPA limit 10000 µg/L
worst single sample: 1370 µg/L | 22/22 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Bromodichloromethane | 2.25 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Bromoform | 2.6 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 11/11 | SYR4 | 2012–2019 |
| Chloroform | 0.9000 µg/L No EPA limit set
worst single sample: 0.9400 µg/L | 11/11 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.65 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 11/11 | SYR4 | 2012–2019 |
| TTHM | 8.65 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 8.8 µg/L | 11/11 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.665 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 8/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.395 µg/L 4% of the EPA limit 60 µg/L
worst single sample: 2.5 µg/L | 8/8 | SYR4 | 2012–2019 |
| Arsenic | 3 µg/L 30% of the EPA limit 10 µg/L | 5/5 | SYR4 | 2012–2019 |
| Lead | 4.8 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 5 µg/L | 5/50 | SYR4 | 2012–2017 |
| Fluoride | 290 µg/L 7.2% of the EPA limit 4000 µg/L
worst single sample: 300 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 0.8455 µg/L No EPA limit set
worst single sample: 0.8500 µg/L | 2/8 | SYR4 | 2012–2019 |
55 contaminants tested, none detected
Utility contact
Frequently asked questions about Virginia City Water Dept
Is Virginia City Water Dept tap water safe to drink?
EPA monitoring detected 14 contaminants in Virginia City Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Virginia City Water Dept's water?
EPA monitoring detected Copper, Nitrate-Nitrite, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Virginia City Water Dept serve?
Virginia City Water Dept reports serving 1,500 people in Montana, per its EPA record.
Has Virginia City Water Dept had any water quality violations?
The EPA has 161 violations on file for Virginia City Water Dept, of which 50 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.