Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MON | Monitoring | Resolved | 2023-09-01 → 2023-09-30 |
| MON | Monitoring | Resolved | 2023-09-01 → 2023-09-30 |
| MON | Monitoring | Resolved | 2023-09-01 → 2023-09-30 |
| Other | Monitoring | Resolved | 2023-07-01 |
| Other | Monitoring | Resolved | 2023-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 700 µg/L 54% of the EPA limit 1300 µg/L
worst single sample: 840 µg/L | 50/50 | SYR4 | 2014–2018 |
| Nitrate-Nitrite | 2059 µg/L 21% of the EPA limit 10000 µg/L
worst single sample: 2590 µg/L | 23/23 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2024 |
| Nitrate | 1870 µg/L 19% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2012–2017 |
| Fluoride | 260 µg/L 6.5% of the EPA limit 4000 µg/L | 8/8 | SYR4 | 2012–2017 |
| Barium | 602 µg/L 30% of the EPA limit 2000 µg/L
worst single sample: 800 µg/L | 7/8 | SYR4 | 2012–2017 |
| Combined Radium (-226 And -228) | 2.6 pCi/L 52% of the EPA limit 5 pCi/L
worst single sample: 2.9 pCi/L | 7/7 | SYR4 | 2014–2017 |
| Combined Uranium | 5.4 µg/L 18% of the EPA limit 30 µg/L
worst single sample: 6 µg/L | 7/7 | SYR4 | 2014–2017 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 6/8 | SYR4 | 2012–2017 |
| Gross Alpha, Excl. Radon And U | 3.625 pCi/L 24% of the EPA limit 15 pCi/L
worst single sample: 3.7 pCi/L | 6/7 | SYR4 | 2014–2017 |
| Chloroform | 15.4 µg/L No EPA limit set
worst single sample: 16 µg/L | 4/16 | SYR4 | 2012–2019 |
| TTHM | 17.55 µg/L 22% of the EPA limit 80 µg/L
worst single sample: 18 µg/L | 4/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.58 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/16 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.86 µg/L No EPA limit set
worst single sample: 12 µg/L | 2/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 28.65 µg/L 48% of the EPA limit 60 µg/L
worst single sample: 29 µg/L | 2/8 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 15.8 µg/L No EPA limit set
worst single sample: 16 µg/L | 2/8 | SYR4 | 2012–2019 |
| Lead | 1 µg/L 6.7% of the EPA limit 15 µg/L | 1/50 | SYR4 | 2014–2018 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Stevensville Town of
Is Stevensville Town of tap water safe to drink?
EPA monitoring detected 17 contaminants in Stevensville Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stevensville Town of's water?
EPA monitoring detected Copper, Nitrate-Nitrite, Lead, Nitrate, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Stevensville Town of serve?
Stevensville Town of reports serving 2,090 people in Montana, per its EPA record.
Has Stevensville Town of had any water quality violations?
The EPA has 75 violations on file for Stevensville Town of, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.