Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2010-03-30 |
| TT | Health-based | Resolved | 2009-11-30 |
| TT | Health-based | Resolved | 2009-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1346 µg/L 104% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 2380 µg/L | 50/50 | SYR4 | 2012–2017 |
| Lead | 4.3 µg/L 29% of the EPA limit 15 µg/L
worst single sample: 5 µg/L | 15/50 | SYR4 | 2012–2017 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2017 |
| Bromodichloromethane | 12.9 µg/L No EPA limit set
worst single sample: 14 µg/L | 12/13 | SYR4 | 2012–2019 |
| Chloroform | 32.45 µg/L No EPA limit set
worst single sample: 33 µg/L | 12/13 | SYR4 | 2012–2019 |
| TTHM | 48.8 µg/L 61% of the EPA limit 80 µg/L
worst single sample: 51 µg/L | 12/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.05 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 11/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 0.7215 µg/L No EPA limit set
worst single sample: 0.7800 µg/L | 10/10 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 16.2 µg/L No EPA limit set
worst single sample: 18 µg/L | 10/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 42.3 µg/L 71% of the EPA limit 60 µg/L
worst single sample: 45 µg/L | 10/10 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 26.1 µg/L No EPA limit set
worst single sample: 27 µg/L | 10/10 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 100 µg/L 1% of the EPA limit 10000 µg/L | 4/20 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 1.3775 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 2/10 | SYR4 | 2012–2019 |
| Arsenic | 3 µg/L 30% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2013–2017 |
| Fluoride | 2200 µg/L 55% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Gross Alpha, Excl. Radon And U | 9.5 pCi/L 63% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2013 |
| Monobromoacetic Acid | 0.6400 µg/L No EPA limit set | 1/10 | SYR4 | 2012–2019 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Fairview Town of
Is Fairview Town of tap water safe to drink?
EPA monitoring detected 17 contaminants in Fairview Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fairview Town of's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Fairview Town of serve?
Fairview Town of reports serving 1,000 people in Montana, per its EPA record.
Has Fairview Town of had any water quality violations?
The EPA has 750 violations on file for Fairview Town of, of which 24 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.