← Missouri

Tap water quality report

Troy

EPA monitoring tested this supplier for 101 contaminants and detected 22. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

101
contaminants tested
22
detected
15,000
people served
47
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Lincoln

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

47
health-based violations
55
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2012-12-01 → 2012-12-31
MCL Health-based Resolved 2012-12-01 → 2012-12-31
MCL Health-based Resolved 2012-12-01 → 2012-12-31
MCL Health-based Resolved 2012-12-01 → 2012-12-31
MCL Health-based Resolved 2012-05-01 → 2012-05-31
MCL Health-based Resolved 2012-05-01 → 2012-05-31
MCL Health-based Resolved 2012-05-01 → 2012-05-31
MCL Health-based Resolved 2012-05-01 → 2012-05-31
MCL Health-based Resolved 2010-01-01 → 2010-12-31
MCL Health-based Resolved 2010-01-01 → 2010-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
161.6 µg/L 12%
of the EPA limit 1300 µg/L
worst single sample: 304 µg/L
69/69 SYR4 2014–2019
Nitrate-Nitrite
62 µg/L 0.6%
of the EPA limit 10000 µg/L
worst single sample: 100 µg/L
56/70 SYR4 2012–2019
Lead
4.715 µg/L 31%
of the EPA limit 15 µg/L
worst single sample: 6.07 µg/L
31/69 SYR4 2014–2019
Combined Radium (-226 And -228)
4.4 pCi/L 88%
of the EPA limit 5 pCi/L
worst single sample: 4.9 pCi/L
23/24 SYR4 2013–2019
Lead
0.0016 mg/L 11%
of the EPA limit 0.0150 mg/L
21/21 LCR 2025
Bromoform
3.757 µg/L
No EPA limit set
worst single sample: 4.42 µg/L
14/18 SYR4 2013–2019
Dibromochloromethane
2.778 µg/L
No EPA limit set
worst single sample: 2.79 µg/L
13/18 SYR4 2013–2019
Lithium
251 µg/L
No EPA limit set
10/10 UCMR-5 2024
Barium
27.7 µg/L 1.4%
of the EPA limit 2000 µg/L
9/9 SYR4 2014–2019
Fluoride
2318 µg/L 58%
of the EPA limit 4000 µg/L
worst single sample: 2330 µg/L
9/9 SYR4 2014–2019
Gross Alpha, Excl. Radon And U
18.14 pCi/L 121%
of the EPA limit, at the 95th percentile of samples — 15 pCi/L
worst single sample: 18.7 pCi/L
9/9 SYR4 2013–2017
Chromium
7.5255 µg/L 7.5%
of the EPA limit 100 µg/L
worst single sample: 7.55 µg/L
8/9 SYR4 2014–2019
TTHM
6.66 µg/L 8.3%
of the EPA limit 80 µg/L
worst single sample: 7.86 µg/L
7/9 SYR4 2013–2019
Bromodichloromethane
1.515 µg/L
No EPA limit set
worst single sample: 1.67 µg/L
6/18 SYR4 2013–2019
Arsenic
4.6915 µg/L 47%
of the EPA limit 10 µg/L
worst single sample: 4.84 µg/L
4/9 SYR4 2014–2019
Selenium
10.206 µg/L 20%
of the EPA limit 50 µg/L
worst single sample: 10.5 µg/L
3/9 SYR4 2014–2019
Cadmium
3.4 µg/L 68%
of the EPA limit 5 µg/L
1/9 SYR4 2014–2019
Chloroform
0.5100 µg/L
No EPA limit set
1/18 SYR4 2013–2019
Combined Uranium
1.788 µg/L 6%
of the EPA limit 30 µg/L
1/9 SYR4 2013–2017
Dibromoacetic Acid
1.31 µg/L
No EPA limit set
1/9 SYR4 2013–2019
Dichloroacetic Acid
1.09 µg/L
No EPA limit set
1/9 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
1.31 µg/L 2.2%
of the EPA limit 60 µg/L
1/9 SYR4 2013–2019
79 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
AYALA, CARLA
Phone
636-528-4712
Email
[email protected]

Frequently asked questions about Troy

Is Troy tap water safe to drink?

EPA monitoring detected 22 contaminants in Troy's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Troy's water?

EPA monitoring detected Copper, Nitrate-Nitrite, Lead, Combined Radium (-226 And -228), Lead, and others. The full list with the level and data source for each is above.

How many people does Troy serve?

Troy reports serving 15,000 people in Missouri, per its EPA record.

Has Troy had any water quality violations?

The EPA has 55 violations on file for Troy, of which 47 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.