Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-10-31 |
| MCL | Health-based | Archived | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Archived | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Archived | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2001-11-01 → 2001-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 104.25 µg/L 8% of the EPA limit 1300 µg/L
worst single sample: 140 µg/L | 36/36 | SYR4 | 2013–2019 |
| Lead | 0.0069 mg/L 46% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2025 |
| Lead | 10.2575 µg/L 68% of the EPA limit 15 µg/L
worst single sample: 12.5 µg/L | 16/36 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 1400 µg/L 14% of the EPA limit 10000 µg/L | 16/32 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.952 µg/L No EPA limit set
worst single sample: 3.33 µg/L | 10/13 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.25 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 10/13 | SYR4 | 2013–2019 |
| Chloroform | 2.391 µg/L No EPA limit set
worst single sample: 2.49 µg/L | 7/13 | SYR4 | 2013–2019 |
| TTHM | 10.469 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 11.3 µg/L | 7/7 | SYR4 | 2013–2019 |
| Barium | 179.25 µg/L 9% of the EPA limit 2000 µg/L
worst single sample: 181 µg/L | 6/6 | SYR4 | 2013–2019 |
| Bromoform | 1.6125 µg/L No EPA limit set
worst single sample: 1.75 µg/L | 6/13 | SYR4 | 2013–2019 |
| Chromium | 3.0455 µg/L 3% of the EPA limit 100 µg/L
worst single sample: 3.11 µg/L | 4/6 | SYR4 | 2013–2019 |
| Fluoride | 147 µg/L 3.7% of the EPA limit 4000 µg/L
worst single sample: 150 µg/L | 4/6 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.3395 µg/L No EPA limit set
worst single sample: 2.41 µg/L | 2/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.161 µg/L No EPA limit set
worst single sample: 2.18 µg/L | 2/7 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.2 pCi/L 24% of the EPA limit 5 pCi/L | 1/4 | SYR4 | 2014 |
54 contaminants tested, none detected
Utility contact
Frequently asked questions about Humansville
Is Humansville tap water safe to drink?
EPA monitoring detected 15 contaminants in Humansville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Humansville's water?
EPA monitoring detected Copper, Lead, Lead, Nitrate-Nitrite, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Humansville serve?
Humansville reports serving 1,048 people in Missouri, per its EPA record.
Has Humansville had any water quality violations?
The EPA has 67 violations on file for Humansville, of which 47 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.