Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-01-01 → 2016-01-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-01-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-01-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-01-31 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 107.2 µg/L 8.2% of the EPA limit 1300 µg/L
worst single sample: 116 µg/L | 17/17 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Nitrate-Nitrite | 21 µg/L 0.2% of the EPA limit 10000 µg/L | 10/16 | SYR4 | 2012–2019 |
| Lead | 3.663 µg/L 24% of the EPA limit 15 µg/L
worst single sample: 3.75 µg/L | 7/17 | SYR4 | 2012–2019 |
| Barium | 30.48 µg/L 1.5% of the EPA limit 2000 µg/L
worst single sample: 30.5 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 1.626 µg/L No EPA limit set
worst single sample: 1.73 µg/L | 3/6 | SYR4 | 2012–2018 |
| Chloroform | 2.058 µg/L No EPA limit set
worst single sample: 2.19 µg/L | 3/6 | SYR4 | 2012–2018 |
| Chromium | 4.782 µg/L 4.8% of the EPA limit 100 µg/L
worst single sample: 5.11 µg/L | 3/3 | SYR4 | 2012–2018 |
| Dibromochloromethane | 1.005 µg/L No EPA limit set
worst single sample: 1.03 µg/L | 3/6 | SYR4 | 2012–2018 |
| Fluoride | 1037 µg/L 26% of the EPA limit 4000 µg/L
worst single sample: 1040 µg/L | 3/3 | SYR4 | 2012–2018 |
| TTHM | 4.8155 µg/L 6% of the EPA limit 80 µg/L
worst single sample: 4.95 µg/L | 2/3 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 1.42 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2017 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Kuhle h20
Is Kuhle h20 tap water safe to drink?
EPA monitoring detected 12 contaminants in Kuhle h20's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kuhle h20's water?
EPA monitoring detected Copper, Lead, Nitrate-Nitrite, Lead, Barium, and others. The full list with the level and data source for each is above.
How many people does Kuhle h20 serve?
Kuhle h20 reports serving 450 people in Missouri, per its EPA record.
Has Kuhle h20 had any water quality violations?
The EPA has 124 violations on file for Kuhle h20, of which 23 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.