Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| RPT | Monitoring | Unaddressed | 2025-07-02 |
| Other | Monitoring | Resolved | 2020-07-01 |
| MR | Monitoring | Resolved | 2015-08-01 → 2015-08-31 |
| MR | Monitoring | Resolved | 2015-08-01 → 2015-08-31 |
| MR | Monitoring | Resolved | 2015-08-01 → 2015-08-31 |
| MR | Monitoring | Resolved | 2015-08-01 → 2015-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 13.865 µg/L No EPA limit set
worst single sample: 14.5 µg/L | 50/50 | SYR4 | 2013–2019 |
| Chloroform | 90.385 µg/L No EPA limit set
worst single sample: 106 µg/L | 50/50 | SYR4 | 2013–2019 |
| TTHM | 100.26 µg/L 125% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 122 µg/L | 50/50 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 30.665 µg/L No EPA limit set
worst single sample: 38.5 µg/L | 50/50 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 42.52 µg/L No EPA limit set
worst single sample: 47.9 µg/L | 49/50 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 81.18 µg/L 135% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 101 µg/L | 45/50 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.3945 µg/L No EPA limit set
worst single sample: 2.44 µg/L | 38/50 | SYR4 | 2013–2019 |
| Copper | 114.3 µg/L 8.8% of the EPA limit 1300 µg/L
worst single sample: 300 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 0.0062 mg/L 41% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2024 |
| Dibromoacetic Acid | 1.934 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 15/50 | SYR4 | 2013–2019 |
| Lead | 22.94 µg/L 153% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 34.6 µg/L | 12/30 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 6.694 µg/L No EPA limit set
worst single sample: 7.45 µg/L | 10/50 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 22.645 µg/L No EPA limit set
worst single sample: 23 µg/L | 2/50 | SYR4 | 2013–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Stanberry
Is Stanberry tap water safe to drink?
EPA monitoring detected 13 contaminants in Stanberry's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stanberry's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Trichloroacetic Acid, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Stanberry serve?
Stanberry reports serving 1,220 people in Missouri, per its EPA record.
Has Stanberry had any water quality violations?
The EPA has 48 violations on file for Stanberry, of which 4 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.