Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2006-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 6.795 µg/L No EPA limit set
worst single sample: 8.33 µg/L | 147/147 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.5905 µg/L No EPA limit set
worst single sample: 12.5 µg/L | 140/144 | SYR4 | 2012–2019 |
| TTHM | 9.806 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 11 µg/L | 45/144 | SYR4 | 2012–2019 |
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 34/34 | LCR | 2025 |
| Bromodichloromethane | 1.7125 µg/L No EPA limit set
worst single sample: 2.15 µg/L | 26/147 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1020 µg/L 10% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.162 µg/L No EPA limit set
worst single sample: 2.24 µg/L | 7/144 | SYR4 | 2012–2019 |
| Chromium | 1.19 µg/L 1.2% of the EPA limit 100 µg/L
worst single sample: 1.25 µg/L | 5/7 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 16.24 µg/L 27% of the EPA limit 60 µg/L
worst single sample: 16.9 µg/L | 4/144 | SYR4 | 2012–2019 |
| Barium | 58.76 µg/L 2.9% of the EPA limit 2000 µg/L
worst single sample: 60 µg/L | 3/3 | SYR4 | 2012–2018 |
| Copper | 3.72 µg/L 0.3% of the EPA limit 1300 µg/L
worst single sample: 3.86 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 235 µg/L 5.9% of the EPA limit 4000 µg/L
worst single sample: 240 µg/L | 3/3 | SYR4 | 2012–2018 |
| Lithium | 40.1 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Dibromochloromethane | 0.5200 µg/L No EPA limit set | 1/147 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 11.6 µg/L No EPA limit set | 1/144 | SYR4 | 2012–2019 |
83 contaminants tested, none detected
Utility contact
Frequently asked questions about Independence
Is Independence tap water safe to drink?
EPA monitoring detected 15 contaminants in Independence's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Independence's water?
EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Independence serve?
Independence reports serving 120,000 people in Missouri, per its EPA record.
Has Independence had any water quality violations?
The EPA has 3 violations on file for Independence, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.