Is Revere Tap Water Safe? Quality Report

Water source: GWP
Ownership: Local government
Counties served: Redwood

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

health-based violations

violations on file

still open

Violation	Type	Status	Period
MR	Monitoring	Resolved	2016-01-01 → 2016-07-25
MR	Monitoring	Resolved	2016-01-01 → 2016-07-25
MR	Monitoring	Resolved	2016-01-01 → 2016-07-25
MR	Monitoring	Resolved	2016-01-01 → 2016-07-25
MR	Monitoring	Resolved	2013-01-01 → 2013-01-18
MR	Monitoring	Resolved	2013-01-01 → 2013-01-18
MR	Monitoring	Resolved	2013-01-01 → 2013-01-18
MR	Monitoring	Resolved	2013-01-01 → 2013-01-18
MR	Monitoring	Archived	1995-07-01 → 1995-09-30
MR	Monitoring	Archived	1995-07-01 → 1995-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.

Contaminant	Level vs EPA limit	Detection rate	Source	Period
Fluoride	930 µg/L 23% of the EPA limit 4000 µg/L	20/20	SYR4	2012–2019
Copper	42.77 µg/L 3.3% of the EPA limit 1300 µg/L worst single sample: 49.7 µg/L	15/15	SYR4	2012–2018
Lead	0.0070 mg/L 47% of the EPA limit 0.0150 mg/L	5/5	LCR	2023
Lead	1.22 µg/L 8.1% of the EPA limit 15 µg/L worst single sample: 1.3 µg/L	5/15	SYR4	2012–2018
Toluene	1.4 µg/L 0.1% of the EPA limit 1000 µg/L	1/1	SYR4	2015

42 contaminants tested, none detected

1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-DichloropropaneAntimony, TotalArsenicBariumBenzeneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbon TetrachlorideChloroformChromiumDichloromethaneDibromoacetic AcidDibromochloromethaneDichloroacetic AcidEthylene DibromideEthylbenzeneGross Alpha, Excl. Radon And UMercuryMonobromoacetic AcidMonochloroacetic AcidNitrate-NitriteSeleniumStyreneTetrachloroethyleneThallium, TotalTrichloroacetic AcidTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Phone: 5078296003
Email: [email protected]

Frequently asked questions about Revere

Is Revere tap water safe to drink?

EPA monitoring detected 5 contaminants in Revere's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Revere's water?

EPA monitoring detected Fluoride, Copper, Lead, Lead, Toluene. The full list with the level and data source for each is above.

How many people does Revere serve?

Revere reports serving 95 people in Minnesota, per its EPA record.

Has Revere had any water quality violations?

The EPA has 19 violations on file for Revere, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.