Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2025-01-01 → 2025-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 2280 µg/L 57% of the EPA limit 4000 µg/L
worst single sample: 3200 µg/L | 37/37 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 600 µg/L 6% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Copper | 583.05 µg/L 45% of the EPA limit 1300 µg/L
worst single sample: 597 µg/L | 10/10 | SYR4 | 2014–2017 |
| Arsenic | 5.288 µg/L 53% of the EPA limit 10 µg/L
worst single sample: 5.82 µg/L | 9/9 | SYR4 | 2012–2019 |
| Chloroform | 8.955 µg/L No EPA limit set
worst single sample: 9 µg/L | 4/6 | SYR4 | 2012–2018 |
| Bromodichloromethane | 5.07 µg/L No EPA limit set
worst single sample: 5.1 µg/L | 3/6 | SYR4 | 2012–2018 |
| Dibromochloromethane | 2.26 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 3/6 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 3.99 µg/L No EPA limit set
worst single sample: 4 µg/L | 3/4 | SYR4 | 2012–2018 |
| Lead | 0.7980 µg/L 5.3% of the EPA limit 15 µg/L
worst single sample: 0.8200 µg/L | 3/10 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 2.8 µg/L No EPA limit set | 3/4 | SYR4 | 2012–2018 |
| Barium | 106.95 µg/L 5.3% of the EPA limit 2000 µg/L
worst single sample: 107 µg/L | 2/2 | SYR4 | 2014–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 2/2 | LCR | 2023 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2018 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Elizabeth
Is Elizabeth tap water safe to drink?
EPA monitoring detected 13 contaminants in Elizabeth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Elizabeth's water?
EPA monitoring detected Fluoride, Nitrate-Nitrite, Copper, Arsenic, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Elizabeth serve?
Elizabeth reports serving 168 people in Minnesota, per its EPA record.
Has Elizabeth had any water quality violations?
The EPA has 96 violations on file for Elizabeth, of which 67 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.