Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 9110 µg/L 91% of the EPA limit 10000 µg/L
worst single sample: 15000 µg/L | 70/70 | SYR4 | 2012–2019 |
| Copper | 208.9 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 308 µg/L | 59/60 | SYR4 | 2012–2019 |
| Lead | 9.995 µg/L 67% of the EPA limit 15 µg/L
worst single sample: 27.6 µg/L | 42/60 | SYR4 | 2012–2019 |
| Fluoride | 1700 µg/L 43% of the EPA limit 4000 µg/L
worst single sample: 2100 µg/L | 34/34 | SYR4 | 2012–2019 |
| Lead | 0.0110 mg/L 73% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Bromodichloromethane | 3.155 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 4/7 | SYR4 | 2013–2019 |
| Chloroform | 3.46 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 4/7 | SYR4 | 2013–2019 |
| Bromoform | 2.28 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 3/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.56 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 3/4 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.09 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 3/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.35 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 2/4 | SYR4 | 2013–2019 |
| Barium | 118 µg/L 5.9% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2019 |
| Gross Alpha, Excl. Radon And U | 19 pCi/L 127% of the EPA limit, at the 95th percentile of samples — 15 pCi/L | 1/5 | SYR4 | 2014–2018 |
| Trichloroacetic Acid | 1.1 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Ellsworth
Is Ellsworth tap water safe to drink?
EPA monitoring detected 14 contaminants in Ellsworth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ellsworth's water?
EPA monitoring detected Nitrate-Nitrite, Copper, Lead, Fluoride, Lead, and others. The full list with the level and data source for each is above.
How many people does Ellsworth serve?
Ellsworth reports serving 462 people in Minnesota, per its EPA record.
Has Ellsworth had any water quality violations?
The EPA has 56 violations on file for Ellsworth, of which 38 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.