Compliance record
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0310 µg/L | 2/2 | 2024 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 796.1 µg/L 61% of the EPA limit 1300 µg/L
worst single sample: 1140 µg/L | 62/62 | SYR4 | 2013–2019 |
| Lead | 2.48 µg/L 17% of the EPA limit 15 µg/L
worst single sample: 4.2 µg/L | 43/62 | SYR4 | 2013–2019 |
| Fluoride | 1040 µg/L 26% of the EPA limit 4000 µg/L
worst single sample: 1100 µg/L | 33/33 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Bromodichloromethane | 5.445 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 12/14 | SYR4 | 2012–2019 |
| Chloroform | 4.425 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 12/14 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.02 µg/L No EPA limit set
worst single sample: 5.2 µg/L | 10/14 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 220 µg/L 2.2% of the EPA limit 10000 µg/L | 10/16 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.79 µg/L No EPA limit set
worst single sample: 3 µg/L | 7/9 | SYR4 | 2012–2019 |
| Bromoform | 0.9550 µg/L No EPA limit set
worst single sample: 1 µg/L | 4/14 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.94 µg/L No EPA limit set
worst single sample: 2 µg/L | 4/9 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.74 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 3/9 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 5.41 pCi/L 36% of the EPA limit 15 pCi/L
worst single sample: 5.5 pCi/L | 2/2 | SYR4 | 2016–2019 |
| Arsenic | 1.05 µg/L 11% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2012 |
| Barium | 110 µg/L 5.5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Saint Anthony Village
Is Saint Anthony Village tap water safe to drink?
EPA monitoring detected 16 contaminants in Saint Anthony Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Saint Anthony Village's water?
EPA monitoring detected Copper, Lead, Fluoride, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Saint Anthony Village serve?
Saint Anthony Village reports serving 9,500 people in Minnesota, per its EPA record.
Has Saint Anthony Village had any water quality violations?
The EPA has no formal drinking-water violations on file for Saint Anthony Village.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.