Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 1992-07-01 → 1992-07-31 |
| MR | Monitoring | Archived | 1992-07-01 → 1992-07-31 |
| MR | Monitoring | Archived | 1992-07-01 → 1992-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 947.5 µg/L 73% of the EPA limit 1300 µg/L
worst single sample: 1080 µg/L | 91/91 | SYR4 | 2013–2019 |
| Lead | 2.5 µg/L 17% of the EPA limit 15 µg/L
worst single sample: 3.4 µg/L | 37/91 | SYR4 | 2013–2019 |
| Fluoride | 1100 µg/L 28% of the EPA limit 4000 µg/L
worst single sample: 1200 µg/L | 34/34 | SYR4 | 2012–2019 |
| Chloroform | 2.315 µg/L No EPA limit set
worst single sample: 5.7 µg/L | 32/37 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.75 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 31/37 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 560 µg/L 5.6% of the EPA limit 10000 µg/L | 16/48 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Dibromochloromethane | 6.9 µg/L No EPA limit set
worst single sample: 8.7 µg/L | 13/37 | SYR4 | 2012–2019 |
| Bromoform | 3.68 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 9/37 | SYR4 | 2012–2019 |
| Barium | 111.625 µg/L 5.6% of the EPA limit 2000 µg/L
worst single sample: 121 µg/L | 6/6 | SYR4 | 2012–2019 |
| Chromium | 0.2570 µg/L 0.3% of the EPA limit 100 µg/L
worst single sample: 0.2600 µg/L | 4/10 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.35 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 4/29 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.3 µg/L No EPA limit set | 3/29 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.675 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 2/29 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 4.35 pCi/L 29% of the EPA limit 15 pCi/L
worst single sample: 4.4 pCi/L | 2/5 | SYR4 | 2012–2018 |
| Arsenic | 3.69 µg/L 37% of the EPA limit 10 µg/L | 1/6 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 0.5700 µg/L 11% of the EPA limit 5 µg/L | 1/8 | SYR4 | 2012–2018 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Champlin
Is Champlin tap water safe to drink?
EPA monitoring detected 17 contaminants in Champlin's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Champlin's water?
EPA monitoring detected Copper, Lead, Fluoride, Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Champlin serve?
Champlin reports serving 23,919 people in Minnesota, per its EPA record.
Has Champlin had any water quality violations?
The EPA has 3 violations on file for Champlin, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.