Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
| MCL | Health-based | Resolved | 2009-11-02 → 2013-05-22 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1500 µg/L 38% of the EPA limit 4000 µg/L
worst single sample: 1600 µg/L | 34/34 | SYR4 | 2012–2019 |
| Copper | 1306.5 µg/L 100% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 1700 µg/L | 30/30 | SYR4 | 2012–2018 |
| Arsenic | 22.3 µg/L 223% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 32 µg/L | 21/21 | SYR4 | 2012–2019 |
| Lead | 7.025 µg/L 47% of the EPA limit 15 µg/L
worst single sample: 8.3 µg/L | 16/30 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 840 µg/L 8.4% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.808 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 5/9 | SYR4 | 2012–2018 |
| Chloroform | 1.34 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 5/9 | SYR4 | 2012–2018 |
| Lead | 0.0080 mg/L 53% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 2024 |
| Dibromoacetic Acid | 2.46 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/4 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 1.765 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 2/4 | SYR4 | 2012–2018 |
| Bromoform | 2.6 µg/L No EPA limit set | 1/9 | SYR4 | 2012–2018 |
| Dibromochloromethane | 2.5 µg/L No EPA limit set | 1/9 | SYR4 | 2012–2018 |
| Mercury | 0.0460 µg/L 2.3% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2012–2019 |
35 contaminants tested, none detected
Utility contact
Frequently asked questions about Herman
Is Herman tap water safe to drink?
EPA monitoring detected 13 contaminants in Herman's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Herman's water?
EPA monitoring detected Fluoride, Copper, Arsenic, Lead, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.
How many people does Herman serve?
Herman reports serving 386 people in Minnesota, per its EPA record.
Has Herman had any water quality violations?
The EPA has 52 violations on file for Herman, of which 20 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.