Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 236.1 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 340 µg/L | 90/90 | SYR4 | 2013–2019 |
| Lead | 5.555 µg/L 37% of the EPA limit 15 µg/L
worst single sample: 8.2 µg/L | 84/90 | SYR4 | 2013–2019 |
| Bromodichloromethane | 9.335 µg/L No EPA limit set
worst single sample: 12 µg/L | 32/34 | SYR4 | 2012–2019 |
| Chloroform | 11.9 µg/L No EPA limit set
worst single sample: 18 µg/L | 32/34 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.845 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 32/34 | SYR4 | 2012–2019 |
| Fluoride | 1100 µg/L 28% of the EPA limit 4000 µg/L
worst single sample: 1200 µg/L | 32/32 | SYR4 | 2012–2019 |
| Bromoform | 1.8 µg/L No EPA limit set
worst single sample: 2 µg/L | 29/33 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.53 µg/L No EPA limit set
worst single sample: 5.2 µg/L | 27/29 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.325 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 26/29 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.71 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 20/29 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 290 µg/L 2.9% of the EPA limit 10000 µg/L | 16/64 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Gross Alpha, Excl. Radon And U | 16.25 pCi/L 108% of the EPA limit, at the 95th percentile of samples — 15 pCi/L
worst single sample: 17 pCi/L | 6/6 | SYR4 | 2014–2017 |
| Barium | 243.9 µg/L 12% of the EPA limit 2000 µg/L
worst single sample: 249 µg/L | 3/3 | SYR4 | 2013 |
| Cyanide | 769 µg/L 385% of the EPA limit, at the 95th percentile of samples — 200 µg/L
worst single sample: 840 µg/L | 3/8 | SYR4 | 2013–2014 |
| Chromium | 0.2380 µg/L 0.2% of the EPA limit 100 µg/L
worst single sample: 0.2400 µg/L | 3/7 | SYR4 | 2013 |
| Toluene | 0.3900 µg/L 0% of the EPA limit 1000 µg/L | 1/4 | SYR4 | 2012–2017 |
| Lithium | 19.7 µg/L No EPA limit set | 1/2 | UCMR-5 | 2024 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Apple Valley
Is Apple Valley tap water safe to drink?
EPA monitoring detected 20 contaminants in Apple Valley's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Apple Valley's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Apple Valley serve?
Apple Valley reports serving 50,300 people in Minnesota, per its EPA record.
Has Apple Valley had any water quality violations?
The EPA has no formal drinking-water violations on file for Apple Valley.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.