Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2001-02-01 → 2001-02-28 |
| MR | Monitoring | Archived | 1993-10-01 → 1993-12-31 |
| MR | Monitoring | Archived | 1993-10-01 → 1993-12-31 |
| MR | Monitoring | Archived | 1993-10-01 → 1993-12-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0154 µg/L | 12/14 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 857.1 µg/L 66% of the EPA limit 1300 µg/L
worst single sample: 940 µg/L | 60/60 | SYR4 | 2014–2017 |
| Chloroform | 3.32 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 35/58 | SYR4 | 2012–2019 |
| Fluoride | 1300 µg/L 33% of the EPA limit 4000 µg/L
worst single sample: 1600 µg/L | 34/34 | SYR4 | 2012–2019 |
| Lead | 5.05 µg/L 34% of the EPA limit 15 µg/L
worst single sample: 18.5 µg/L | 34/60 | SYR4 | 2014–2017 |
| Bromodichloromethane | 2.15 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 31/58 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.79 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 19/31 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.44 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 13/58 | SYR4 | 2012–2019 |
| Barium | 105.96 µg/L 5.3% of the EPA limit 2000 µg/L
worst single sample: 111 µg/L | 9/10 | SYR4 | 2013–2018 |
| Trichloroacetic Acid | 2.4 µg/L No EPA limit set
worst single sample: 3 µg/L | 9/31 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| Chromium | 0.2975 µg/L 0.3% of the EPA limit 100 µg/L
worst single sample: 0.3000 µg/L | 6/16 | SYR4 | 2013–2018 |
| Arsenic | 6.366 µg/L 64% of the EPA limit 10 µg/L
worst single sample: 6.85 µg/L | 5/11 | SYR4 | 2013–2018 |
| Gross Alpha, Excl. Radon And U | 5.52 pCi/L 37% of the EPA limit 15 pCi/L
worst single sample: 5.7 pCi/L | 3/10 | SYR4 | 2014–2018 |
| 2,4-D | 0.1200 µg/L 0.2% of the EPA limit 70 µg/L | 1/21 | SYR4 | 2012–2018 |
| Bromoform | 0.5000 µg/L No EPA limit set | 1/58 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.7000 µg/L 12% of the EPA limit 6 µg/L | 1/22 | SYR4 | 2012–2018 |
| Ethylbenzene | 1.1 µg/L 0.2% of the EPA limit 700 µg/L | 1/26 | SYR4 | 2012–2019 |
83 contaminants tested, none detected
Utility contact
Frequently asked questions about Ramsey
Is Ramsey tap water safe to drink?
EPA monitoring detected 18 contaminants in Ramsey's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ramsey's water?
EPA monitoring detected Copper, Chloroform, Fluoride, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Ramsey serve?
Ramsey reports serving 17,705 people in Minnesota, per its EPA record.
Has Ramsey had any water quality violations?
The EPA has 4 violations on file for Ramsey, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.