Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 1999-06-01 → 1999-06-30 |
| TT | Health-based | Resolved | 1999-06-01 → 1999-06-30 |
| TT | Health-based | Resolved | 1999-05-01 → 1999-05-31 |
| TT | Health-based | Resolved | 1999-05-01 → 1999-05-31 |
| TT | Health-based | Resolved | 1999-03-01 → 1999-03-31 |
| TT | Health-based | Resolved | 1999-03-01 → 1999-03-31 |
| TT | Health-based | Resolved | 1999-02-01 → 1999-02-28 |
| TT | Health-based | Resolved | 1999-02-01 → 1999-02-28 |
| TT | Health-based | Resolved | 1999-01-01 → 1999-01-31 |
| TT | Health-based | Resolved | 1999-01-01 → 1999-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 810 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 1200 µg/L | 99/99 | SYR4 | 2012–2019 |
| Nitrate | 7885 µg/L 79% of the EPA limit 10000 µg/L
worst single sample: 8500 µg/L | 64/64 | SYR4 | 2012–2019 |
| Copper | 424.5 µg/L 33% of the EPA limit 1300 µg/L
worst single sample: 790 µg/L | 32/32 | SYR4 | 2013–2019 |
| Lead | 0.0026 mg/L 17% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Lead | 9.075 µg/L 61% of the EPA limit 15 µg/L
worst single sample: 12 µg/L | 16/32 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.785 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 4/13 | SYR4 | 2012–2019 |
| Bromoform | 2.07 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 4/13 | SYR4 | 2012–2019 |
| Chloroform | 1.5 µg/L No EPA limit set | 4/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.25 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/5 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.71 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 4/13 | SYR4 | 2012–2019 |
| TTHM | 9.95 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 10.1 µg/L | 4/5 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.57 µg/L 4.3% of the EPA limit 60 µg/L
worst single sample: 2.6 µg/L | 4/5 | SYR4 | 2013–2019 |
| Barium | 27.9 µg/L 1.4% of the EPA limit 2000 µg/L
worst single sample: 28 µg/L | 2/2 | SYR4 | 2014–2017 |
| Chromium | 1.79 µg/L 1.8% of the EPA limit 100 µg/L
worst single sample: 1.8 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 1.19 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/5 | SYR4 | 2013–2019 |
54 contaminants tested, none detected
Utility contact
Frequently asked questions about Limestone Water & Sewer District
Is Limestone Water & Sewer District tap water safe to drink?
EPA monitoring detected 15 contaminants in Limestone Water & Sewer District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Limestone Water & Sewer District's water?
EPA monitoring detected Fluoride, Nitrate, Copper, Lead, Lead, and others. The full list with the level and data source for each is above.
How many people does Limestone Water & Sewer District serve?
Limestone Water & Sewer District reports serving 875 people in Maine, per its EPA record.
Has Limestone Water & Sewer District had any water quality violations?
The EPA has 76 violations on file for Limestone Water & Sewer District, of which 63 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.