Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2003-10-01 |
| TT | Health-based | Resolved | 2003-10-01 |
| TT | Health-based | Resolved | 2003-10-01 |
| TT | Health-based | Resolved | 2003-10-01 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| MR | Monitoring | Resolved | 2019-01-01 |
| MR | Monitoring | Resolved | 2017-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2011-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 700 µg/L 7% of the EPA limit 10000 µg/L | 20/20 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2022 |
| TTHM | 23.3085 µg/L 29% of the EPA limit 80 µg/L
worst single sample: 27.19 µg/L | 8/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.128 µg/L No EPA limit set
worst single sample: 7.14 µg/L | 7/7 | SYR4 | 2012–2019 |
| Chloroform | 16.121 µg/L No EPA limit set
worst single sample: 16.13 µg/L | 7/7 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.288 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 7/7 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 5.008 µg/L 8.3% of the EPA limit 60 µg/L
worst single sample: 5.74 µg/L | 7/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 600 µg/L 6% of the EPA limit 10000 µg/L | 6/6 | SYR4 | 2013–2018 |
| Bromoform | 0.6960 µg/L No EPA limit set
worst single sample: 0.7000 µg/L | 3/6 | SYR4 | 2012–2016 |
| Dichloroacetic Acid | 3.58 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 3/3 | SYR4 | 2012–2014 |
| Fluoride | 100 µg/L 2.5% of the EPA limit 4000 µg/L | 2/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.8100 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2014 |
| Trichloroacetic Acid | 1.13 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2014 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Clear Spring
Is Town of Clear Spring tap water safe to drink?
EPA monitoring detected 13 contaminants in Town of Clear Spring's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Clear Spring's water?
EPA monitoring detected Nitrate, Lead, TTHM, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Town of Clear Spring serve?
Town of Clear Spring reports serving 455 people in Maryland, per its EPA record.
Has Town of Clear Spring had any water quality violations?
The EPA has 20 violations on file for Town of Clear Spring, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.