Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Barium | 46 µg/L 2.3% of the EPA limit 2000 µg/L
worst single sample: 48 µg/L | 9/9 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2023 |
| TTHM | 14.59 µg/L 18% of the EPA limit 80 µg/L
worst single sample: 15.4 µg/L | 7/7 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 5.68 µg/L 9.5% of the EPA limit 60 µg/L
worst single sample: 6.1 µg/L | 7/7 | SYR4 | 2014–2019 |
| Bromodichloromethane | 3.714 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 4/5 | SYR4 | 2014–2017 |
| Chloroform | 6.2035 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 4/5 | SYR4 | 2014–2017 |
| Dibromochloromethane | 2.3325 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/5 | SYR4 | 2014–2017 |
| Fluoride | 128.5 µg/L 3.2% of the EPA limit 4000 µg/L
worst single sample: 129 µg/L | 3/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.4415 µg/L No EPA limit set
worst single sample: 3.46 µg/L | 2/2 | SYR4 | 2014 |
| Dibromoacetic Acid | 1.11 µg/L No EPA limit set | 1/2 | SYR4 | 2014 |
| Trichloroacetic Acid | 1.06 µg/L No EPA limit set | 1/2 | SYR4 | 2014 |
89 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Millington
Is Town of Millington tap water safe to drink?
EPA monitoring detected 11 contaminants in Town of Millington's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Millington's water?
EPA monitoring detected Barium, Lead, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Town of Millington serve?
Town of Millington reports serving 625 people in Maryland, per its EPA record.
Has Town of Millington had any water quality violations?
The EPA has 12 violations on file for Town of Millington, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.