Tap WaterIndex

← Maryland

Tap water quality report

Campus Hills Water Works

EPA monitoring tested this supplier for 71 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

71
contaminants tested
13
detected
250
people served
9
health-based violations
Maryland rankingsLead in MarylandPFAS in Maryland
Water source
Ground water
Ownership
Private
Counties served
Harford

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

9
health-based violations
23
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 1994-01-01 → 1997-01-06
TT Health-based Resolved 1994-01-01 → 1997-01-06
TT Health-based Resolved 1994-01-01 → 1997-01-06
MCL Health-based Archived 1993-06-01 → 1993-06-30
MCL Health-based Archived 1993-06-01 → 1993-06-30
MCL Health-based Archived 1993-06-01 → 1993-06-30
MCL Health-based Resolved 1993-01-01 → 1993-01-31
MCL Health-based Resolved 1993-01-01 → 1993-01-31
MCL Health-based Resolved 1993-01-01 → 1993-01-31
MR Monitoring Archived 1998-01-01 → 1998-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.0024 mg/L 16%
of the EPA limit 0.0150 mg/L
 17/17 LCR 2025
Nitrate
4160 µg/L 42%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Chloroform
1.586 µg/L
No EPA limit set
worst single sample: 1.62 µg/L
5/6 SYR4 2013–2019
Dibromochloromethane
2.32 µg/L
No EPA limit set
worst single sample: 2.55 µg/L
5/5 SYR4 2013–2019
Barium
75.85 µg/L 3.8%
of the EPA limit 2000 µg/L
worst single sample: 77 µg/L
3/3 SYR4 2013–2019
Bromodichloromethane
1.52 µg/L
No EPA limit set
worst single sample: 1.61 µg/L
3/4 SYR4 2013–2016
Bromoform
1.227 µg/L
No EPA limit set
worst single sample: 1.3 µg/L
3/4 SYR4 2013–2016
TTHM
7.052 µg/L 8.8%
of the EPA limit 80 µg/L
worst single sample: 7.08 µg/L
3/3 SYR4 2013–2017
Dibromoacetic Acid
1.3635 µg/L
No EPA limit set
worst single sample: 1.4 µg/L
2/2 SYR4 2013–2014
Selenium
3.145 µg/L 6.3%
of the EPA limit 50 µg/L
worst single sample: 3.2 µg/L
2/3 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
1.3635 µg/L 2.3%
of the EPA limit 60 µg/L
worst single sample: 1.4 µg/L
2/3 SYR4 2013–2017
Chromium
2.6 µg/L 2.6%
of the EPA limit 100 µg/L
 1/3 SYR4 2013–2019
Combined Radium (-226 And -228)
0.6000 pCi/L 12%
of the EPA limit 5 pCi/L
 1/1 SYR4 2018
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneFluorideGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
EDWARDS, JAMES
Email
[email protected]

Frequently asked questions about Campus Hills Water Works

Is Campus Hills Water Works tap water safe to drink?

EPA monitoring detected 13 contaminants in Campus Hills Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Campus Hills Water Works's water?

EPA monitoring detected Lead, Nitrate, Chloroform, Dibromochloromethane, Barium, and others. The full list with the level and data source for each is above.

How many people does Campus Hills Water Works serve?

Campus Hills Water Works reports serving 250 people in Maryland, per its EPA record.

Has Campus Hills Water Works had any water quality violations?

The EPA has 23 violations on file for Campus Hills Water Works, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.