Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 1994-07-30 → 1994-08-29 |
| TT | Health-based | Resolved | 1994-07-30 → 1994-08-29 |
| TT | Health-based | Resolved | 1994-07-30 → 1994-08-29 |
| TT | Health-based | Resolved | 1994-07-30 → 1994-08-29 |
| Other | Monitoring | Resolved | 2008-07-01 |
| Other | Monitoring | Resolved | 2008-07-01 |
| MR | Monitoring | Resolved | 2007-08-01 → 2007-08-31 |
| MR | Monitoring | Resolved | 2007-08-01 → 2007-08-31 |
| MR | Monitoring | Resolved | 2007-08-01 → 2007-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0066 mg/L 44% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Barium | 108.3 µg/L 5.4% of the EPA limit 2000 µg/L
worst single sample: 109 µg/L | 3/4 | SYR4 | 2012–2018 |
| Fluoride | 599 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 600 µg/L | 3/4 | SYR4 | 2012–2018 |
| Selenium | 14.17 µg/L 28% of the EPA limit 50 µg/L
worst single sample: 15 µg/L | 3/4 | SYR4 | 2012–2018 |
| Chromium | 4.772 µg/L 4.8% of the EPA limit 100 µg/L
worst single sample: 4.8 µg/L | 2/4 | SYR4 | 2012–2018 |
| TTHM | 4.665 µg/L 5.8% of the EPA limit 80 µg/L
worst single sample: 4.69 µg/L | 2/2 | SYR4 | 2014–2017 |
| Arsenic | 4.5 µg/L 45% of the EPA limit 10 µg/L | 1/4 | SYR4 | 2012–2018 |
| Bromoform | 2.19 µg/L No EPA limit set | 1/2 | SYR4 | 2012–2014 |
| Combined Radium (-226 And -228) | 1.9 pCi/L 38% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2019 |
| Dibromochloromethane | 2 µg/L No EPA limit set | 1/2 | SYR4 | 2012–2014 |
| Total Haloacetic Acids (HAA5) | 1.08 µg/L 1.8% of the EPA limit 60 µg/L | 1/2 | SYR4 | 2014–2017 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Kitzmiller
Is Town of Kitzmiller tap water safe to drink?
EPA monitoring detected 11 contaminants in Town of Kitzmiller's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Kitzmiller's water?
EPA monitoring detected Lead, Barium, Fluoride, Selenium, Chromium, and others. The full list with the level and data source for each is above.
How many people does Town of Kitzmiller serve?
Town of Kitzmiller reports serving 370 people in Maryland, per its EPA record.
Has Town of Kitzmiller had any water quality violations?
The EPA has 9 violations on file for Town of Kitzmiller, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.