← Maryland

Tap water quality report

Broad Creek

EPA monitoring tested this supplier for 102 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

102
contaminants tested
15
detected
26,033
people served
0
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Anne Arundel

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
9
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2025-10-01
MR Monitoring Resolved 2022-10-01
MR Monitoring Resolved 2018-07-01
MR Monitoring Resolved 2010-04-01 → 2010-06-30
MR Monitoring Resolved 2010-04-01 → 2010-06-30
Other Monitoring Resolved 2008-07-01
MR Monitoring Resolved 2008-04-01 → 2008-04-30
MR Monitoring Resolved 2008-04-01 → 2008-04-30
MR Monitoring Resolved 2008-04-01 → 2008-04-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
14 µg/L 18%
of the EPA limit 80 µg/L
worst single sample: 25.1 µg/L
81/87 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
10.52 µg/L 18%
of the EPA limit 60 µg/L
worst single sample: 13.3 µg/L
55/86 SYR4 2012–2019
Chloroform
7.46 µg/L
No EPA limit set
worst single sample: 10.3 µg/L
34/38 SYR4 2012–2016
Bromodichloromethane
1.8 µg/L
No EPA limit set
worst single sample: 1.9 µg/L
21/38 SYR4 2012–2016
Dichloroacetic Acid
4.08 µg/L
No EPA limit set
worst single sample: 8.5 µg/L
14/37 SYR4 2012–2015
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
11/11 LCR 2019
Trichloroacetic Acid
2.2 µg/L
No EPA limit set
worst single sample: 2.9 µg/L
11/37 SYR4 2012–2015
Dibromochloromethane
0.9950 µg/L
No EPA limit set
worst single sample: 1.1 µg/L
8/38 SYR4 2012–2016
Barium
30.85 µg/L 1.5%
of the EPA limit 2000 µg/L
worst single sample: 34 µg/L
4/5 SYR4 2014–2019
Dibromoacetic Acid
0.6800 µg/L
No EPA limit set
worst single sample: 0.7000 µg/L
3/37 SYR4 2012–2015
Monochloroacetic Acid
1.12 µg/L
No EPA limit set
worst single sample: 1.2 µg/L
3/37 SYR4 2012–2015
Fluoride
553.5 µg/L 14%
of the EPA limit 4000 µg/L
worst single sample: 570 µg/L
2/4 SYR4 2014–2017
Combined Radium (-226 And -228)
0.2000 pCi/L 4%
of the EPA limit 5 pCi/L
1/2 SYR4 2012
Monobromoacetic Acid
0.2000 µg/L
No EPA limit set
1/37 SYR4 2012–2015
Lithium
11.4 µg/L
No EPA limit set
1/2 UCMR-5 2023
87 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitrateNitrate-NitriteNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JONES, TERELL
Phone
443-790-5373
Email
[email protected]

Frequently asked questions about Broad Creek

Is Broad Creek tap water safe to drink?

EPA monitoring detected 15 contaminants in Broad Creek's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Broad Creek's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Broad Creek serve?

Broad Creek reports serving 26,033 people in Maryland, per its EPA record.

Has Broad Creek had any water quality violations?

The EPA has 9 violations on file for Broad Creek, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.