Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-05-01 → 2025-05-31 |
| TT | Health-based | Resolved | 2025-05-01 → 2025-05-31 |
| TT | Health-based | Resolved | 2025-05-01 → 2025-05-31 |
| TT | Health-based | Resolved | 2025-05-01 → 2025-05-31 |
| TT | Health-based | Resolved | 2021-03-01 → 2021-03-31 |
| TT | Health-based | Resolved | 2021-03-01 → 2021-03-31 |
| TT | Health-based | Resolved | 2021-03-01 → 2021-03-31 |
| TT | Health-based | Resolved | 2021-03-01 → 2021-03-31 |
| TT | Health-based | Resolved | 2009-01-01 → 2009-01-31 |
| TT | Health-based | Resolved | 2009-01-01 → 2009-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 48.708 µg/L 61% of the EPA limit 80 µg/L
worst single sample: 54.6 µg/L | 58/58 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 47.17 µg/L 79% of the EPA limit 60 µg/L
worst single sample: 102.5 µg/L | 58/58 | SYR4 | 2012–2019 |
| Chloroform | 43.682 µg/L No EPA limit set
worst single sample: 51.3 µg/L | 45/45 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.479 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 38/45 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 29.125 µg/L No EPA limit set
worst single sample: 53.6 µg/L | 36/36 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 27.375 µg/L No EPA limit set
worst single sample: 42.2 µg/L | 36/36 | SYR4 | 2012–2017 |
| Nitrate | 990 µg/L 9.9% of the EPA limit 10000 µg/L
worst single sample: 1000 µg/L | 22/22 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Barium | 36.825 µg/L 1.8% of the EPA limit 2000 µg/L
worst single sample: 37.1 µg/L | 6/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.95 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 5/44 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 788 µg/L 7.9% of the EPA limit 10000 µg/L
worst single sample: 800 µg/L | 4/4 | SYR4 | 2015–2018 |
| Monochloroacetic Acid | 10.23 µg/L No EPA limit set
worst single sample: 11 µg/L | 3/36 | SYR4 | 2012–2017 |
| Hexachlorocyclopentadiene | 0.0565 µg/L 0.1% of the EPA limit 50 µg/L | 1/12 | SYR4 | 2012–2019 |
| Methoxychlor | 0.8500 µg/L 2.1% of the EPA limit 40 µg/L | 1/12 | SYR4 | 2012–2019 |
| Thallium, Total | 1 µg/L 50% of the EPA limit 2 µg/L | 1/13 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Westernport
Is Town of Westernport tap water safe to drink?
EPA monitoring detected 15 contaminants in Town of Westernport's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Westernport's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Town of Westernport serve?
Town of Westernport reports serving 2,200 people in Maryland, per its EPA record.
Has Town of Westernport had any water quality violations?
The EPA has 42 violations on file for Town of Westernport, of which 17 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.