Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2005-04-01 |
| TT | Health-based | Resolved | 2005-04-01 |
| TT | Health-based | Resolved | 2005-04-01 |
| TT | Health-based | Resolved | 2005-04-01 |
| TT | Health-based | Resolved | 2005-04-01 |
| TT | Health-based | Resolved | 2004-11-30 |
| TT | Health-based | Resolved | 2004-11-30 |
| TT | Health-based | Resolved | 2004-11-30 |
| TT | Health-based | Resolved | 2004-11-30 |
| TT | Health-based | Resolved | 2004-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 51.24 µg/L 64% of the EPA limit 80 µg/L
worst single sample: 64 µg/L | 69/69 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 51.5635 µg/L 86% of the EPA limit 60 µg/L
worst single sample: 65.4 µg/L | 68/68 | SYR4 | 2012–2019 |
| Chloroform | 44.225 µg/L No EPA limit set
worst single sample: 60 µg/L | 56/56 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.07 µg/L No EPA limit set
worst single sample: 11.78 µg/L | 51/56 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 25.73 µg/L No EPA limit set
worst single sample: 36.6 µg/L | 47/48 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 25.7 µg/L No EPA limit set
worst single sample: 39 µg/L | 44/48 | SYR4 | 2012–2017 |
| Nitrate | 2470 µg/L 25% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2022 |
| Dibromochloromethane | 5.5895 µg/L No EPA limit set
worst single sample: 7.78 µg/L | 14/56 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.3354 µg/L No EPA limit set
worst single sample: 3.45 µg/L | 13/48 | SYR4 | 2012–2017 |
| Dibromoacetic Acid | 1.762 µg/L No EPA limit set
worst single sample: 2.05 µg/L | 9/48 | SYR4 | 2012–2017 |
| Bromoform | 1.72 µg/L No EPA limit set
worst single sample: 1.96 µg/L | 6/55 | SYR4 | 2012–2018 |
| Barium | 83.125 µg/L 4.2% of the EPA limit 2000 µg/L
worst single sample: 84 µg/L | 2/2 | SYR4 | 2013–2016 |
| Monobromoacetic Acid | 2.709 µg/L No EPA limit set
worst single sample: 2.73 µg/L | 2/48 | SYR4 | 2012–2017 |
| Lithium | 11.9 µg/L No EPA limit set | 2/8 | UCMR-5 | 2024 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Lavale Sanitary Commission
Is Lavale Sanitary Commission tap water safe to drink?
EPA monitoring detected 15 contaminants in Lavale Sanitary Commission's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lavale Sanitary Commission's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Lavale Sanitary Commission serve?
Lavale Sanitary Commission reports serving 5,500 people in Maryland, per its EPA record.
Has Lavale Sanitary Commission had any water quality violations?
The EPA has 53 violations on file for Lavale Sanitary Commission, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.