Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2009-09-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-09-01 → 2009-09-30 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 91.875 µg/L 115% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 102 µg/L | 66/66 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 45.295 µg/L 75% of the EPA limit 60 µg/L
worst single sample: 49 µg/L | 64/64 | SYR4 | 2012–2019 |
| Bromodichloromethane | 19.54 µg/L No EPA limit set
worst single sample: 21.9 µg/L | 49/49 | SYR4 | 2013–2019 |
| Chloroform | 72.36 µg/L No EPA limit set
worst single sample: 80 µg/L | 49/49 | SYR4 | 2013–2019 |
| Dibromochloromethane | 6.56 µg/L No EPA limit set
worst single sample: 7 µg/L | 49/49 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 20.58 µg/L No EPA limit set
worst single sample: 22.2 µg/L | 45/45 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 24.95 µg/L No EPA limit set
worst single sample: 32.7 µg/L | 44/45 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Nitrate | 1190 µg/L 12% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.23 µg/L No EPA limit set
worst single sample: 5 µg/L | 12/45 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.05 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 7/45 | SYR4 | 2013–2019 |
| Bromoform | 0.5900 µg/L No EPA limit set
worst single sample: 0.6000 µg/L | 3/49 | SYR4 | 2013–2019 |
| Copper | 669 µg/L 51% of the EPA limit 1300 µg/L
worst single sample: 730 µg/L | 3/3 | SYR4 | 2017–2019 |
75 contaminants tested, none detected
Utility contact
Frequently asked questions about Dighton Water District
Is Dighton Water District tap water safe to drink?
EPA monitoring detected 17 contaminants in Dighton Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Dighton Water District's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Dighton Water District serve?
Dighton Water District reports serving 5,280 people in Massachusetts, per its EPA record.
Has Dighton Water District had any water quality violations?
The EPA has 20 violations on file for Dighton Water District, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.