Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| MCL | Health-based | Resolved | 2009-08-01 → 2009-08-31 |
| MCL | Health-based | Resolved | 2009-08-01 → 2009-08-31 |
| MR | Monitoring | Archived | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Addressed | 2023-06-01 |
| MR | Monitoring | Resolved | 2011-01-01 |
| MR | Monitoring | Resolved | 2011-01-01 |
| MR | Monitoring | Resolved | 2011-01-01 → 2011-03-31 |
| MR | Monitoring | Resolved | 2011-01-01 → 2011-03-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 13.6 µg/L No EPA limit set
worst single sample: 17.2 µg/L | 64/64 | SYR4 | 2012–2019 |
| Chloroform | 50.925 µg/L No EPA limit set
worst single sample: 68.9 µg/L | 64/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.9555 µg/L No EPA limit set
worst single sample: 9.93 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 62.38 µg/L 78% of the EPA limit 80 µg/L
worst single sample: 79.2 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 20.54 µg/L 34% of the EPA limit 60 µg/L
worst single sample: 33.2 µg/L | 57/64 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 9.055 µg/L No EPA limit set
worst single sample: 18.2 µg/L | 56/64 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 12.045 µg/L No EPA limit set
worst single sample: 28.4 µg/L | 52/64 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 2.073 µg/L No EPA limit set
worst single sample: 2.31 µg/L | 27/64 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2023 |
| Bromoform | 4.03 µg/L No EPA limit set | 11/64 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.128 µg/L No EPA limit set
worst single sample: 3.14 µg/L | 4/64 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.57 µg/L No EPA limit set | 1/64 | SYR4 | 2012–2019 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about Kenwood Water District
Is Kenwood Water District tap water safe to drink?
EPA monitoring detected 16 contaminants in Kenwood Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kenwood Water District's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Kenwood Water District serve?
Kenwood Water District reports serving 9,620 people in Massachusetts, per its EPA record.
Has Kenwood Water District had any water quality violations?
The EPA has 25 violations on file for Kenwood Water District, of which 4 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.