Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-07-01 → 2023-09-30 |
| MCL | Health-based | Resolved | 2023-07-01 → 2023-09-30 |
| MCL | Health-based | Resolved | 2023-07-01 → 2023-09-30 |
| MCL | Health-based | Resolved | 2023-07-01 → 2023-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 56.3 µg/L No EPA limit set
worst single sample: 59.6 µg/L | 33/34 | SYR4 | 2013–2019 |
| TTHM | 132.38 µg/L 165% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 137 µg/L | 33/34 | SYR4 | 2013–2019 |
| Bromodichloromethane | 47.29 µg/L No EPA limit set
worst single sample: 49.5 µg/L | 32/34 | SYR4 | 2013–2019 |
| Dibromochloromethane | 30.05 µg/L No EPA limit set
worst single sample: 31.6 µg/L | 31/34 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 62.65 µg/L 104% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 71.5 µg/L | 28/35 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 29.05 µg/L No EPA limit set
worst single sample: 31.5 µg/L | 26/35 | SYR4 | 2013–2019 |
| Bromoform | 4.048 µg/L No EPA limit set
worst single sample: 17.6 µg/L | 25/34 | SYR4 | 2013–2019 |
| Copper | 500 µg/L 38% of the EPA limit 1300 µg/L | 23/34 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 25 µg/L No EPA limit set
worst single sample: 29.3 µg/L | 23/35 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 6.96 µg/L No EPA limit set
worst single sample: 7.4 µg/L | 22/35 | SYR4 | 2013–2019 |
| Lead | 9.025 µg/L 60% of the EPA limit 15 µg/L
worst single sample: 23 µg/L | 14/34 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.18 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 13/35 | SYR4 | 2013–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2024 |
| Nitrate-Nitrite | 83 µg/L 0.8% of the EPA limit 10000 µg/L | 8/32 | SYR4 | 2012–2019 |
| Fluoride | 430 µg/L 11% of the EPA limit 4000 µg/L
worst single sample: 440 µg/L | 6/6 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 22.04 µg/L No EPA limit set
worst single sample: 22.3 µg/L | 5/35 | SYR4 | 2013–2019 |
| Barium | 15.4 µg/L 0.8% of the EPA limit 2000 µg/L
worst single sample: 16 µg/L | 4/6 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.9741 pCi/L 19% of the EPA limit 5 pCi/L
worst single sample: 0.9930 pCi/L | 2/4 | SYR4 | 2016–2019 |
| Di(2-ethylhexyl) Phthalate | 1.1765 µg/L 20% of the EPA limit 6 µg/L
worst single sample: 1.19 µg/L | 2/6 | SYR4 | 2012–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Tannehill Water
Is Tannehill Water tap water safe to drink?
EPA monitoring detected 19 contaminants in Tannehill Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Tannehill Water's water?
EPA monitoring detected Chloroform, TTHM, Bromodichloromethane, Dibromochloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Tannehill Water serve?
Tannehill Water reports serving 1,932 people in Louisiana, per its EPA record.
Has Tannehill Water had any water quality violations?
The EPA has 258 violations on file for Tannehill Water, of which 248 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.