Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 434.76 µg/L 543% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 441.3 µg/L | 39/39 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 96.98 µg/L 162% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 112.7 µg/L | 38/39 | SYR4 | 2012–2019 |
| Bromodichloromethane | 39.43 µg/L No EPA limit set
worst single sample: 44.8 µg/L | 35/39 | SYR4 | 2012–2019 |
| Chloroform | 134.4 µg/L No EPA limit set
worst single sample: 158 µg/L | 33/39 | SYR4 | 2012–2019 |
| Dibromochloromethane | 163.6 µg/L No EPA limit set
worst single sample: 168 µg/L | 33/39 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 67.1 µg/L No EPA limit set
worst single sample: 80.8 µg/L | 29/39 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 27.315 µg/L No EPA limit set
worst single sample: 31.9 µg/L | 28/39 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 66.44 µg/L No EPA limit set
worst single sample: 69.4 µg/L | 23/39 | SYR4 | 2012–2019 |
| Bromoform | 258 µg/L No EPA limit set
worst single sample: 270 µg/L | 22/39 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 5.6 µg/L No EPA limit set
worst single sample: 6.2 µg/L | 13/39 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| Monochloroacetic Acid | 7.08 µg/L No EPA limit set
worst single sample: 7.2 µg/L | 5/39 | SYR4 | 2012–2019 |
| Copper | 200 µg/L 15% of the EPA limit 1300 µg/L | 3/10 | SYR4 | 2013–2017 |
| Lead | 1 µg/L 6.7% of the EPA limit 15 µg/L | 2/10 | SYR4 | 2013–2017 |
Utility contact
Frequently asked questions about Ramsey Water
Is Ramsey Water tap water safe to drink?
EPA monitoring detected 14 contaminants in Ramsey Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ramsey Water's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Ramsey Water serve?
Ramsey Water reports serving 84 people in Louisiana, per its EPA record.
Has Ramsey Water had any water quality violations?
The EPA has 192 violations on file for Ramsey Water, of which 138 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.