Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1993-09-01 → 1993-09-30 |
| MCL | Health-based | Resolved | 1993-09-01 → 1993-09-30 |
| MCL | Health-based | Resolved | 1993-09-01 → 1993-09-30 |
| MCL | Health-based | Resolved | 1993-09-01 → 1993-09-30 |
| MR | Monitoring | Resolved | 2016-03-01 → 2016-03-31 |
| MR | Monitoring | Resolved | 2016-03-01 → 2016-03-31 |
| MR | Monitoring | Resolved | 2016-03-01 → 2016-03-31 |
| MR | Monitoring | Resolved | 2016-03-01 → 2016-03-31 |
| Other | Monitoring | Resolved | 2014-07-01 |
| Other | Monitoring | Resolved | 2014-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 33.02 µg/L 41% of the EPA limit 80 µg/L
worst single sample: 83.4 µg/L | 120/120 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 17.27 µg/L 29% of the EPA limit 60 µg/L
worst single sample: 26.8 µg/L | 115/120 | SYR4 | 2012–2019 |
| Copper | 136.2 µg/L 10% of the EPA limit 1300 µg/L
worst single sample: 496 µg/L | 57/60 | SYR4 | 2014–2017 |
| Lead | 28.6 µg/L 191% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 43 µg/L | 17/60 | SYR4 | 2014–2017 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2023 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Taylorsville Water Works
Is Taylorsville Water Works tap water safe to drink?
EPA monitoring detected 7 contaminants in Taylorsville Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Taylorsville Water Works's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, Lead, and others. The full list with the level and data source for each is above.
How many people does Taylorsville Water Works serve?
Taylorsville Water Works reports serving 22,286 people in Kentucky, per its EPA record.
Has Taylorsville Water Works had any water quality violations?
The EPA has 39 violations on file for Taylorsville Water Works, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.