Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Resolved | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Resolved | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Resolved | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 72.9 µg/L 91% of the EPA limit 80 µg/L
worst single sample: 105.9 µg/L | 137/137 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 88.66 µg/L 148% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 117 µg/L | 137/137 | SYR4 | 2012–2019 |
| Copper | 81.25 µg/L 6.3% of the EPA limit 1300 µg/L
worst single sample: 233 µg/L | 88/99 | SYR4 | 2012–2019 |
| Lead | 1.255 µg/L 8.4% of the EPA limit 15 µg/L
worst single sample: 2.5 µg/L | 24/90 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Fluoride | 880 µg/L 22% of the EPA limit 4000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Nitrate | 270 µg/L 2.7% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Barium | 22.4 µg/L 1.1% of the EPA limit 2000 µg/L
worst single sample: 23 µg/L | 5/8 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Nitrate-Nitrite | 220 µg/L 2.2% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2014 |
90 contaminants tested, none detected
Utility contact
Frequently asked questions about Rattlesnake Ridge Water District
Is Rattlesnake Ridge Water District tap water safe to drink?
EPA monitoring detected 10 contaminants in Rattlesnake Ridge Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rattlesnake Ridge Water District's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, Lead, and others. The full list with the level and data source for each is above.
How many people does Rattlesnake Ridge Water District serve?
Rattlesnake Ridge Water District reports serving 11,397 people in Kentucky, per its EPA record.
Has Rattlesnake Ridge Water District had any water quality violations?
The EPA has 103 violations on file for Rattlesnake Ridge Water District, of which 55 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.