Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| TT | Health-based | Resolved | 2025-03-01 → 2025-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| TT | Health-based | Resolved | 2019-12-01 → 2019-12-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 71.41 µg/L 89% of the EPA limit 80 µg/L
worst single sample: 87.7 µg/L | 124/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 88.85 µg/L 148% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 129 µg/L | 124/124 | SYR4 | 2012–2019 |
| Copper | 339 µg/L 26% of the EPA limit 1300 µg/L
worst single sample: 610 µg/L | 75/100 | SYR4 | 2012–2019 |
| Nitrate | 2975.5 µg/L 30% of the EPA limit 10000 µg/L
worst single sample: 3100 µg/L | 24/28 | SYR4 | 2012–2019 |
| Lead | 8 µg/L 53% of the EPA limit 15 µg/L
worst single sample: 16 µg/L | 21/92 | SYR4 | 2012–2018 |
| Fluoride | 1162 µg/L 29% of the EPA limit 4000 µg/L
worst single sample: 1190 µg/L | 15/15 | SYR4 | 2012–2019 |
| Lead | 0.0060 mg/L 40% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Barium | 26.5 µg/L 1.3% of the EPA limit 2000 µg/L
worst single sample: 30 µg/L | 8/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2060 µg/L 21% of the EPA limit 10000 µg/L
worst single sample: 2270 µg/L | 5/5 | SYR4 | 2013–2014 |
| Xylenes, Total | 1.15 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 1.2 µg/L | 3/24 | SYR4 | 2012–2019 |
| Vinyl Chloride | 1.165 µg/L 58% of the EPA limit 2 µg/L
worst single sample: 1.2 µg/L | 2/24 | SYR4 | 2012–2019 |
| Beryllium, Total | 0.2000 µg/L 5% of the EPA limit 4 µg/L | 1/8 | SYR4 | 2012–2019 |
| Chlorobenzene | 0.7000 µg/L 0.7% of the EPA limit 100 µg/L | 1/24 | SYR4 | 2012–2019 |
| Selenium | 3 µg/L 6% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2012–2019 |
| Toluene | 0.7000 µg/L 0.1% of the EPA limit 1000 µg/L | 1/24 | SYR4 | 2012–2019 |
| Trichloroethylene | 428 µg/L 8560% of the EPA limit, at the 95th percentile of samples — 5 µg/L | 1/24 | SYR4 | 2012–2019 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Paris Water Works
Is Paris Water Works tap water safe to drink?
EPA monitoring detected 20 contaminants in Paris Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Paris Water Works's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Nitrate, Lead, and others. The full list with the level and data source for each is above.
How many people does Paris Water Works serve?
Paris Water Works reports serving 14,139 people in Kentucky, per its EPA record.
Has Paris Water Works had any water quality violations?
The EPA has 728 violations on file for Paris Water Works, of which 155 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.