Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MCL | Health-based | Resolved | 2012-04-01 → 2012-04-30 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 174.5 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 410 µg/L | 60/60 | SYR4 | 2012–2018 |
| Bromodichloromethane | 4.895 µg/L No EPA limit set
worst single sample: 5 µg/L | 22/22 | SYR4 | 2013–2019 |
| Bromoform | 8.852 µg/L No EPA limit set
worst single sample: 9.4 µg/L | 22/22 | SYR4 | 2013–2019 |
| Chloroform | 2.6 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 22/22 | SYR4 | 2013–2019 |
| Dibromochloromethane | 7.5 µg/L No EPA limit set
worst single sample: 8 µg/L | 22/22 | SYR4 | 2013–2019 |
| TTHM | 22 µg/L 28% of the EPA limit 80 µg/L | 22/22 | SYR4 | 2013–2019 |
| Lead | 7.105 µg/L 47% of the EPA limit 15 µg/L
worst single sample: 7.2 µg/L | 20/60 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 5.4 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 19/22 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.83 µg/L No EPA limit set
worst single sample: 3 µg/L | 18/22 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 11.75 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 16 µg/L | 18/22 | SYR4 | 2013–2019 |
| Lead | 0.0037 mg/L 25% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Trichloroacetic Acid | 1.6 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 11/22 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 0.9755 µg/L No EPA limit set
worst single sample: 0.9800 µg/L | 4/22 | SYR4 | 2013–2019 |
| Lithium | 15 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Monochloroacetic Acid | 8.36 µg/L No EPA limit set
worst single sample: 8.9 µg/L | 3/22 | SYR4 | 2013–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Bel Aire, City of
Is Bel Aire, City of tap water safe to drink?
EPA monitoring detected 15 contaminants in Bel Aire, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bel Aire, City of's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Bel Aire, City of serve?
Bel Aire, City of reports serving 8,448 people in Kansas, per its EPA record.
Has Bel Aire, City of had any water quality violations?
The EPA has 20 violations on file for Bel Aire, City of, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.