Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2007-08-01 → 2007-08-31 |
| MCL | Health-based | Resolved | 2007-08-01 → 2007-08-31 |
| MCL | Health-based | Resolved | 2007-08-01 → 2007-08-31 |
| MCL | Health-based | Resolved | 2007-08-01 → 2007-08-31 |
| MCL | Health-based | Resolved | 2007-08-01 → 2007-08-31 |
| MR | Monitoring | Unaddressed | 2025-10-01 |
| MR | Monitoring | Unaddressed | 2025-10-01 |
| MON | Monitoring | Resolved | 2025-08-01 → 2025-08-31 |
| MON | Monitoring | Resolved | 2025-08-01 → 2025-08-31 |
| MON | Monitoring | Resolved | 2025-08-01 → 2025-08-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 36.6 µg/L 2.8% of the EPA limit 1300 µg/L
worst single sample: 130 µg/L | 58/60 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 4.4 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 21/21 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 8.2 µg/L 14% of the EPA limit 60 µg/L
worst single sample: 15 µg/L | 21/21 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.51 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 19/21 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.815 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 18/18 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6.645 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 18/18 | SYR4 | 2014–2019 |
| TTHM | 22.15 µg/L 28% of the EPA limit 80 µg/L
worst single sample: 23 µg/L | 18/18 | SYR4 | 2014–2019 |
| Bromoform | 10 µg/L No EPA limit set | 17/18 | SYR4 | 2014–2019 |
| Chloroform | 2.82 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 15/18 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2.24 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 13/21 | SYR4 | 2013–2019 |
| Lead | 0.0019 mg/L 13% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Lithium | 21 µg/L No EPA limit set | 8/8 | UCMR-5 | 2025 |
| Lead | 23 µg/L 153% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 25 µg/L | 5/60 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 0.5760 µg/L No EPA limit set
worst single sample: 0.5800 µg/L | 3/21 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 9.6 µg/L No EPA limit set
worst single sample: 10 µg/L | 2/21 | SYR4 | 2013–2019 |
24 contaminants tested, none detected
Utility contact
Frequently asked questions about Park City, City of
Is Park City, City of tap water safe to drink?
EPA monitoring detected 20 contaminants in Park City, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Park City, City of's water?
EPA monitoring detected Copper, Dibromoacetic Acid, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Park City, City of serve?
Park City, City of reports serving 8,503 people in Kansas, per its EPA record.
Has Park City, City of had any water quality violations?
The EPA has 76 violations on file for Park City, City of, of which 5 are health-based (a contaminant limit or required treatment was breached) and 8 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.