Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1998-12-01 → 1998-12-31 |
| MCL | Health-based | Resolved | 1998-12-01 → 1998-12-31 |
| MCL | Health-based | Resolved | 1998-12-01 → 1998-12-31 |
| MCL | Health-based | Resolved | 1998-12-01 → 1998-12-31 |
| RPT | Monitoring | Unaddressed | 2025-07-02 |
| RPT | Monitoring | Unaddressed | 2025-07-02 |
| Other | Monitoring | Resolved | 2000-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 311 µg/L 24% of the EPA limit 1300 µg/L
worst single sample: 670 µg/L | 40/40 | SYR4 | 2014–2017 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2023 |
| Bromodichloromethane | 16 µg/L No EPA limit set | 10/10 | SYR4 | 2013–2019 |
| Chloroform | 23.55 µg/L No EPA limit set
worst single sample: 24 µg/L | 10/10 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.065 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 10/10 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.5 µg/L No EPA limit set | 10/10 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 8.01 µg/L No EPA limit set
worst single sample: 9 µg/L | 10/10 | SYR4 | 2013–2019 |
| TTHM | 45.55 µg/L 57% of the EPA limit 80 µg/L
worst single sample: 46 µg/L | 10/10 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 12.65 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 14 µg/L | 10/10 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.51 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 10/10 | SYR4 | 2013–2019 |
| Lead | 6.38 µg/L 43% of the EPA limit 15 µg/L
worst single sample: 8.2 µg/L | 8/40 | SYR4 | 2014–2017 |
| Lithium | 60 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
| Bromoform | 0.8900 µg/L No EPA limit set
worst single sample: 0.9400 µg/L | 5/10 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 0.6240 µg/L No EPA limit set
worst single sample: 0.6300 µg/L | 2/10 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2 µg/L No EPA limit set | 1/10 | SYR4 | 2013–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Lan Del Water District
Is Lan Del Water District tap water safe to drink?
EPA monitoring detected 15 contaminants in Lan Del Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lan Del Water District's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Lan Del Water District serve?
Lan Del Water District reports serving 7,302 people in Kansas, per its EPA record.
Has Lan Del Water District had any water quality violations?
The EPA has 7 violations on file for Lan Del Water District, of which 4 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.