Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 16.2 µg/L 162% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 19 µg/L | 33/33 | SYR4 | 2012–2019 |
| Copper | 823.6 µg/L 63% of the EPA limit 1300 µg/L
worst single sample: 1360 µg/L | 10/10 | SYR4 | 2017 |
| TTHM | 32.8 µg/L 41% of the EPA limit 80 µg/L
worst single sample: 46 µg/L | 9/9 | SYR4 | 2012–2019 |
| Nitrate | 300 µg/L 3% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Lead | 0.0410 mg/L 273% above the EPA limit of 0.0150 mg/L | 7/7 | LCR | 2004 |
| Total Haloacetic Acids (HAA5) | 24.8 µg/L 41% of the EPA limit 60 µg/L
worst single sample: 29 µg/L | 7/9 | SYR4 | 2012–2019 |
| Barium | 805.1 µg/L 40% of the EPA limit 2000 µg/L
worst single sample: 808 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 461.5 µg/L 12% of the EPA limit 4000 µg/L
worst single sample: 470 µg/L | 2/2 | SYR4 | 2014–2017 |
| Lead | 23 µg/L 153% of the EPA limit, at the 95th percentile of samples — 15 µg/L | 1/10 | SYR4 | 2017 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Perrysville Water Works
Is Perrysville Water Works tap water safe to drink?
EPA monitoring detected 9 contaminants in Perrysville Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Perrysville Water Works's water?
EPA monitoring detected Arsenic, Copper, TTHM, Nitrate, Lead, and others. The full list with the level and data source for each is above.
How many people does Perrysville Water Works serve?
Perrysville Water Works reports serving 470 people in Indiana, per its EPA record.
Has Perrysville Water Works had any water quality violations?
The EPA has 603 violations on file for Perrysville Water Works, of which 298 are health-based (a contaminant limit or required treatment was breached) and 7 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.