Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| MCL | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| MCL | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| MCL | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| MCL | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 2090 µg/L 161% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 11000 µg/L | 36/40 | SYR4 | 2016–2018 |
| Lead | 79.45 µg/L 530% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 110 µg/L | 14/40 | SYR4 | 2016–2018 |
| Barium | 293.5 µg/L 15% of the EPA limit 2000 µg/L
worst single sample: 310 µg/L | 12/12 | SYR4 | 2014–2017 |
| Fluoride | 1100 µg/L 28% of the EPA limit 4000 µg/L | 12/12 | SYR4 | 2014–2017 |
| Lead | 0.00066 mg/L 4.4% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2028 |
| Arsenic | 2.18 µg/L 22% of the EPA limit 10 µg/L
worst single sample: 2.3 µg/L | 5/12 | SYR4 | 2014–2017 |
| Gross Alpha, Excl. Radon And U | 5.28 pCi/L 35% of the EPA limit 15 pCi/L
worst single sample: 5.5 pCi/L | 5/6 | SYR4 | 2014 |
| Chloroform | 2.545 µg/L No EPA limit set
worst single sample: 2.55 µg/L | 3/12 | SYR4 | 2014–2017 |
| Selenium | 2.2 µg/L 4.4% of the EPA limit 50 µg/L | 3/12 | SYR4 | 2014–2017 |
| Chromium | 0.9000 µg/L 0.9% of the EPA limit 100 µg/L | 1/12 | SYR4 | 2014–2017 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Hilltop Ridge Apartments Phase Two
Is Hilltop Ridge Apartments Phase Two tap water safe to drink?
EPA monitoring detected 10 contaminants in Hilltop Ridge Apartments Phase Two's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hilltop Ridge Apartments Phase Two's water?
EPA monitoring detected Copper, Lead, Barium, Fluoride, Lead, and others. The full list with the level and data source for each is above.
How many people does Hilltop Ridge Apartments Phase Two serve?
Hilltop Ridge Apartments Phase Two reports serving 29 people in Indiana, per its EPA record.
Has Hilltop Ridge Apartments Phase Two had any water quality violations?
The EPA has 123 violations on file for Hilltop Ridge Apartments Phase Two, of which 29 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.