Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2002-04-01 → 2002-04-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-04-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-04-30 |
| MCL | Health-based | Resolved | 2002-04-01 → 2002-04-30 |
| MR | Monitoring | Archived | 1980-06-30 → 1980-09-29 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 14.88 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 21.1 µg/L | 112/114 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.58 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 12.6 µg/L | 109/114 | SYR4 | 2012–2019 |
| Copper | 144.05 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 150 µg/L | 30/30 | SYR4 | 2017 |
| Nitrate | 2892.3 µg/L 29% of the EPA limit 10000 µg/L
worst single sample: 3390 µg/L | 28/32 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Lead | 2.755 µg/L 18% of the EPA limit 15 µg/L
worst single sample: 2.8 µg/L | 10/30 | SYR4 | 2017 |
| Barium | 137.25 µg/L 6.9% of the EPA limit 2000 µg/L
worst single sample: 143 µg/L | 6/6 | SYR4 | 2012–2018 |
| Fluoride | 904 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 917 µg/L | 6/6 | SYR4 | 2012–2018 |
| Arsenic | 1.385 µg/L 14% of the EPA limit 10 µg/L
worst single sample: 1.4 µg/L | 4/6 | SYR4 | 2012–2018 |
| Selenium | 1.09 µg/L 2.2% of the EPA limit 50 µg/L
worst single sample: 1.1 µg/L | 3/6 | SYR4 | 2012–2018 |
| Antimony, Total | 2.345 µg/L 39% of the EPA limit 6 µg/L
worst single sample: 2.4 µg/L | 2/6 | SYR4 | 2012–2018 |
| Chloroform | 1.4 µg/L No EPA limit set | 1/4 | SYR4 | 2012–2015 |
| Combined Uranium | 1 µg/L 3.3% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2014 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Connersville Utilities
Is Connersville Utilities tap water safe to drink?
EPA monitoring detected 13 contaminants in Connersville Utilities's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Connersville Utilities's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Nitrate, Lead, and others. The full list with the level and data source for each is above.
How many people does Connersville Utilities serve?
Connersville Utilities reports serving 13,282 people in Indiana, per its EPA record.
Has Connersville Utilities had any water quality violations?
The EPA has 5 violations on file for Connersville Utilities, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.