← Indiana

Tap water quality report

Mulberry Water Works

EPA monitoring tested this supplier for 70 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

70
contaminants tested
11
detected
1,252
people served
6
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Clinton

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

6
health-based violations
25
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2000-05-01 → 2000-05-31
MCL Health-based Resolved 2000-05-01 → 2000-05-31
MCL Health-based Resolved 2000-05-01 → 2000-05-31
MCL Health-based Resolved 2000-05-01 → 2000-05-31
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MON Monitoring Resolved 2021-08-01 → 2021-08-31
MON Monitoring Resolved 2021-08-01 → 2021-08-31
MON Monitoring Resolved 2021-08-01 → 2021-08-31
MR Monitoring Resolved 2017-11-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
949.5 µg/L 73%
of the EPA limit 1300 µg/L
worst single sample: 4780 µg/L
56/60 SYR4 2017–2019
Arsenic
9.68 µg/L 97%
of the EPA limit 10 µg/L
worst single sample: 10.4 µg/L
25/25 SYR4 2014–2019
Lead
5.445 µg/L 36%
of the EPA limit 15 µg/L
worst single sample: 9.7 µg/L
22/60 SYR4 2017–2019
TTHM
2.71 µg/L 3.4%
of the EPA limit 80 µg/L
worst single sample: 3.2 µg/L
15/15 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
2.65 µg/L 4.4%
of the EPA limit 60 µg/L
worst single sample: 2.7 µg/L
11/15 SYR4 2012–2019
Lead
0.0050 mg/L 33%
of the EPA limit 0.0150 mg/L
6/6 LCR 2002
Barium
359.75 µg/L 18%
of the EPA limit 2000 µg/L
worst single sample: 365 µg/L
4/4 SYR4 2014–2017
Fluoride
700 µg/L 18%
of the EPA limit 4000 µg/L
4/4 SYR4 2014–2017
Nitrate
180 µg/L 1.8%
of the EPA limit 10000 µg/L
4/26 SYR4 2012–2017
Nitrate-Nitrite
169.5 µg/L 1.7%
of the EPA limit 10000 µg/L
worst single sample: 170 µg/L
2/4 SYR4 2018–2019
Di(2-ethylhexyl) Phthalate
0.7700 µg/L 13%
of the EPA limit 6 µg/L
1/6 SYR4 2012–2018
59 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
FICKLE, NICK
Phone
765-491-7233
Email
[email protected]

Frequently asked questions about Mulberry Water Works

Is Mulberry Water Works tap water safe to drink?

EPA monitoring detected 11 contaminants in Mulberry Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Mulberry Water Works's water?

EPA monitoring detected Copper, Arsenic, Lead, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Mulberry Water Works serve?

Mulberry Water Works reports serving 1,252 people in Indiana, per its EPA record.

Has Mulberry Water Works had any water quality violations?

The EPA has 25 violations on file for Mulberry Water Works, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.