Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MCL | Health-based | Resolved | 2012-08-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| Other | Monitoring | Resolved | 2010-07-01 |
| Other | Monitoring | Resolved | 2010-07-01 |
| MR | Monitoring | Resolved | 2009-09-01 → 2009-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 500 µg/L 5% of the EPA limit 10000 µg/L | 16/22 | SYR4 | 2012–2017 |
| TTHM | 37.65 µg/L 47% of the EPA limit 80 µg/L
worst single sample: 51 µg/L | 16/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 10.25 µg/L 17% of the EPA limit 60 µg/L
worst single sample: 11.9 µg/L | 11/16 | SYR4 | 2012–2019 |
| Copper | 148.4 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 170 µg/L | 10/10 | SYR4 | 2018 |
| Lead | 2.01 µg/L 13% of the EPA limit 15 µg/L
worst single sample: 2.1 µg/L | 7/10 | SYR4 | 2018 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2002 |
| Barium | 42.2 µg/L 2.1% of the EPA limit 2000 µg/L
worst single sample: 42.4 µg/L | 5/5 | SYR4 | 2012–2018 |
| Fluoride | 1640 µg/L 41% of the EPA limit 4000 µg/L
worst single sample: 1800 µg/L | 5/5 | SYR4 | 2012–2018 |
| Xylenes, Total | 4.39 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 4.7 µg/L | 3/20 | SYR4 | 2012–2017 |
| Nitrate-Nitrite | 425 µg/L 4.3% of the EPA limit 10000 µg/L
worst single sample: 430 µg/L | 2/2 | SYR4 | 2018–2019 |
| Antimony, Total | 0.6000 µg/L 10% of the EPA limit 6 µg/L | 1/5 | SYR4 | 2012–2018 |
| Ethylbenzene | 0.9000 µg/L 0.1% of the EPA limit 700 µg/L | 1/20 | SYR4 | 2012–2017 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Woodburn Water Works
Is Woodburn Water Works tap water safe to drink?
EPA monitoring detected 12 contaminants in Woodburn Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Woodburn Water Works's water?
EPA monitoring detected Nitrate, TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, and others. The full list with the level and data source for each is above.
How many people does Woodburn Water Works serve?
Woodburn Water Works reports serving 1,609 people in Indiana, per its EPA record.
Has Woodburn Water Works had any water quality violations?
The EPA has 328 violations on file for Woodburn Water Works, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.