Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-07-01 → 2021-09-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 513.25 µg/L 39% of the EPA limit 1300 µg/L
worst single sample: 695 µg/L | 46/60 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Barium | 240 µg/L 12% of the EPA limit 2000 µg/L | 13/13 | SYR4 | 2012–2018 |
| Fluoride | 1109 µg/L 28% of the EPA limit 4000 µg/L
worst single sample: 1120 µg/L | 12/13 | SYR4 | 2012–2018 |
| Bromodichloromethane | 3.96 µg/L No EPA limit set
worst single sample: 4.03 µg/L | 8/8 | SYR4 | 2013–2019 |
| Chloroform | 19.225 µg/L No EPA limit set
worst single sample: 20.1 µg/L | 8/8 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 4.108 pCi/L 82% of the EPA limit 5 pCi/L
worst single sample: 4.15 pCi/L | 8/8 | SYR4 | 2012–2018 |
| Dibromochloromethane | 1.42335 µg/L No EPA limit set
worst single sample: 1.43 µg/L | 8/8 | SYR4 | 2013–2019 |
| TTHM | 24.42 µg/L 31% of the EPA limit 80 µg/L
worst single sample: 25.4 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 7.335 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 8 µg/L | 8/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.76 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 8/8 | SYR4 | 2013–2019 |
| Arsenic | 1.47 µg/L 15% of the EPA limit 10 µg/L
worst single sample: 1.5 µg/L | 4/13 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 4.831 µg/L No EPA limit set
worst single sample: 5 µg/L | 3/8 | SYR4 | 2013–2019 |
| Lead | 4.515 µg/L 30% of the EPA limit 15 µg/L
worst single sample: 4.7 µg/L | 2/60 | SYR4 | 2013–2019 |
| Cadmium | 1.6 µg/L 32% of the EPA limit 5 µg/L | 1/13 | SYR4 | 2012–2018 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Cherry Valley
Is Cherry Valley tap water safe to drink?
EPA monitoring detected 15 contaminants in Cherry Valley's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cherry Valley's water?
EPA monitoring detected Copper, Lead, Barium, Fluoride, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Cherry Valley serve?
Cherry Valley reports serving 4,731 people in Illinois, per its EPA record.
Has Cherry Valley had any water quality violations?
The EPA has 22 violations on file for Cherry Valley, of which 14 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.