Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Archived | 2025-12-01 → 2025-12-31 |
| TT | Health-based | Archived | 2025-12-01 → 2025-12-31 |
| TT | Health-based | Archived | 2025-12-01 → 2025-12-31 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| TT | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| TT | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| TT | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dichloroacetic Acid | 27.2696 µg/L No EPA limit set
worst single sample: 30.6 µg/L | 28/28 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 36.588 µg/L 61% of the EPA limit 60 µg/L
worst single sample: 37.9 µg/L | 28/28 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.424 µg/L No EPA limit set
worst single sample: 6.94 µg/L | 28/28 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.89 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 27/27 | SYR4 | 2012–2019 |
| Chloroform | 46.15 µg/L No EPA limit set
worst single sample: 48.9 µg/L | 27/27 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.41 µg/L No EPA limit set
worst single sample: 11.2 µg/L | 27/27 | SYR4 | 2012–2019 |
| TTHM | 58.64 µg/L 73% of the EPA limit 80 µg/L
worst single sample: 63.8 µg/L | 27/27 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2022 |
| Monobromoacetic Acid | 7.668 µg/L No EPA limit set
worst single sample: 14.7 µg/L | 13/28 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.69 µg/L No EPA limit set
worst single sample: 6.76 µg/L | 11/28 | SYR4 | 2012–2019 |
| Copper | 49.017 µg/L 3.8% of the EPA limit 1300 µg/L
worst single sample: 55.83 µg/L | 10/30 | SYR4 | 2013–2019 |
| Bromoform | 1.786 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 4/27 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.5675 µg/L No EPA limit set
worst single sample: 1.62 µg/L | 4/28 | SYR4 | 2012–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Blairsville Pwd
Is Blairsville Pwd tap water safe to drink?
EPA monitoring detected 13 contaminants in Blairsville Pwd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Blairsville Pwd's water?
EPA monitoring detected Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Blairsville Pwd serve?
Blairsville Pwd reports serving 807 people in Illinois, per its EPA record.
Has Blairsville Pwd had any water quality violations?
The EPA has 34 violations on file for Blairsville Pwd, of which 13 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.