Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2025-07-01 |
| MR | Monitoring | Unaddressed | 2023-10-01 |
| MR | Monitoring | Unaddressed | 2023-10-01 |
| MR | Monitoring | Unaddressed | 2023-10-01 |
| MR | Monitoring | Resolved | 2010-10-01 |
| MR | Monitoring | Resolved | 2010-10-01 |
| MR | Monitoring | Resolved | 2010-10-01 |
| MR | Monitoring | Resolved | 2010-10-01 |
| MR | Monitoring | Archived | 1996-12-01 → 1996-12-31 |
| MR | Monitoring | Archived | 1996-12-01 → 1996-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 46.09 µg/L No EPA limit set
worst single sample: 51.2 µg/L | 28/28 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 26.2825 µg/L No EPA limit set
worst single sample: 30.4 µg/L | 28/28 | SYR4 | 2012–2019 |
| TTHM | 59.12 µg/L 74% of the EPA limit 80 µg/L
worst single sample: 65.9 µg/L | 28/28 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 31.49 µg/L 52% of the EPA limit 60 µg/L
worst single sample: 43.6 µg/L | 28/28 | SYR4 | 2012–2019 |
| Bromodichloromethane | 13.15 µg/L No EPA limit set
worst single sample: 14.4 µg/L | 27/28 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.289 µg/L No EPA limit set
worst single sample: 7.12 µg/L | 27/28 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 6.359 µg/L No EPA limit set
worst single sample: 8.08 µg/L | 27/28 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2023 |
| Monobromoacetic Acid | 3.415 µg/L No EPA limit set
worst single sample: 4.91 µg/L | 14/28 | SYR4 | 2012–2019 |
| Copper | 46.53 µg/L 3.6% of the EPA limit 1300 µg/L
worst single sample: 48.6 µg/L | 10/20 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 4.1355 µg/L No EPA limit set
worst single sample: 4.65 µg/L | 8/28 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.4205 µg/L No EPA limit set
worst single sample: 2.44 µg/L | 4/28 | SYR4 | 2012–2019 |
| Lead | 1.446 µg/L 9.6% of the EPA limit 15 µg/L
worst single sample: 1.45 µg/L | 3/20 | SYR4 | 2014–2017 |
| Bromoform | 1.0715 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 2/28 | SYR4 | 2012–2019 |
Utility contact
Frequently asked questions about Ferges Water District
Is Ferges Water District tap water safe to drink?
EPA monitoring detected 14 contaminants in Ferges Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ferges Water District's water?
EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Ferges Water District serve?
Ferges Water District reports serving 1,185 people in Illinois, per its EPA record.
Has Ferges Water District had any water quality violations?
The EPA has 15 violations on file for Ferges Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 4 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.