← Illinois

Tap water quality report

Crete

EPA monitoring tested this supplier for 108 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
19
detected
8,275
people served
14
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Will

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

14
health-based violations
50
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2011-07-01 → 2011-07-31
MCL Health-based Resolved 2011-07-01 → 2011-07-31
MCL Health-based Resolved 2011-07-01 → 2011-07-31
MCL Health-based Resolved 2011-07-01 → 2011-07-31
MCL Health-based Resolved 2004-07-01 → 2004-07-31
MCL Health-based Resolved 2004-07-01 → 2004-07-31
MCL Health-based Resolved 2004-07-01 → 2004-07-31
MCL Health-based Resolved 2004-07-01 → 2004-07-31
MCL Health-based Archived 1993-08-01 → 1993-08-31
MCL Health-based Archived 1993-08-01 → 1993-08-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
373 µg/L 29%
of the EPA limit 1300 µg/L
worst single sample: 610 µg/L
38/40 SYR4 2014–2017
Lead
0.0130 mg/L 87%
of the EPA limit 0.0150 mg/L
19/19 LCR 2025
Barium
76.8 µg/L 3.8%
of the EPA limit 2000 µg/L
worst single sample: 81 µg/L
15/15 SYR4 2012–2019
Fluoride
1600 µg/L 40%
of the EPA limit 4000 µg/L
15/15 SYR4 2012–2019
Lead
9.18 µg/L 61%
of the EPA limit 15 µg/L
worst single sample: 11 µg/L
14/40 SYR4 2014–2017
Nitrate
80 µg/L 0.8%
of the EPA limit 10000 µg/L
14/80 SYR4 2012–2019
Lithium
34 µg/L
No EPA limit set
10/10 UCMR-5 2024
Bromodichloromethane
9.854 µg/L
No EPA limit set
worst single sample: 10.4 µg/L
8/8 SYR4 2013–2019
Chloroform
22.495 µg/L
No EPA limit set
worst single sample: 22.6 µg/L
8/8 SYR4 2013–2019
Dibromochloromethane
3.6015 µg/L
No EPA limit set
worst single sample: 3.85 µg/L
8/8 SYR4 2013–2019
TTHM
35.9 µg/L 45%
of the EPA limit 80 µg/L
worst single sample: 36.6 µg/L
8/8 SYR4 2013–2019
Arsenic
2.37 µg/L 24%
of the EPA limit 10 µg/L
worst single sample: 2.4 µg/L
7/15 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
15.601 µg/L 26%
of the EPA limit 60 µg/L
worst single sample: 16.09 µg/L
7/8 SYR4 2013–2019
Trichloroacetic Acid
7.318 µg/L
No EPA limit set
worst single sample: 7.42 µg/L
7/8 SYR4 2013–2019
Combined Radium (-226 And -228)
1.614 pCi/L 32%
of the EPA limit 5 pCi/L
worst single sample: 1.67 pCi/L
5/5 SYR4 2014–2017
Dichloroacetic Acid
8.6055 µg/L
No EPA limit set
worst single sample: 8.67 µg/L
2/8 SYR4 2013–2019
Chromium
6.2 µg/L 6.2%
of the EPA limit 100 µg/L
1/15 SYR4 2012–2019
Nitrate-Nitrite
80 µg/L 0.8%
of the EPA limit 10000 µg/L
1/15 SYR4 2012–2019
Selenium
3.1 µg/L 6.2%
of the EPA limit 50 µg/L
1/15 SYR4 2012–2019
89 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SMITH, MICHAEL E.
Phone
708-672-7100
Email
[email protected]

Frequently asked questions about Crete

Is Crete tap water safe to drink?

EPA monitoring detected 19 contaminants in Crete's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Crete's water?

EPA monitoring detected Copper, Lead, Barium, Fluoride, Lead, and others. The full list with the level and data source for each is above.

How many people does Crete serve?

Crete reports serving 8,275 people in Illinois, per its EPA record.

Has Crete had any water quality violations?

The EPA has 50 violations on file for Crete, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.