Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 94.85 µg/L 7.3% of the EPA limit 1300 µg/L
worst single sample: 110 µg/L | 44/44 | SYR4 | 2014–2019 |
| Lead | 0.0072 mg/L 48% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2025 |
| Lead | 7.285 µg/L 49% of the EPA limit 15 µg/L
worst single sample: 14 µg/L | 18/44 | SYR4 | 2014–2019 |
| Bromodichloromethane | 14.5035 µg/L No EPA limit set
worst single sample: 14.91 µg/L | 4/4 | SYR4 | 2013–2018 |
| Chloroform | 28.1195 µg/L No EPA limit set
worst single sample: 28.22 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dibromoacetic Acid | 2.6865 µg/L No EPA limit set
worst single sample: 2.79 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dibromochloromethane | 8.42845 µg/L No EPA limit set
worst single sample: 8.497 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dichloroacetic Acid | 9.535 µg/L No EPA limit set
worst single sample: 9.7 µg/L | 4/4 | SYR4 | 2013–2018 |
| TTHM | 50.6605 µg/L 63% of the EPA limit 80 µg/L
worst single sample: 51.76 µg/L | 4/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 19.22 µg/L 32% of the EPA limit 60 µg/L
worst single sample: 19.4 µg/L | 4/4 | SYR4 | 2013–2018 |
| Trichloroacetic Acid | 8.45 µg/L No EPA limit set
worst single sample: 8.6 µg/L | 4/4 | SYR4 | 2013–2018 |
| Bromoform | 1.0434 µg/L No EPA limit set
worst single sample: 1.07 µg/L | 3/4 | SYR4 | 2013–2018 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Riverside Mhp, Llc
Is Riverside Mhp, Llc tap water safe to drink?
EPA monitoring detected 12 contaminants in Riverside Mhp, Llc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Riverside Mhp, Llc's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Riverside Mhp, Llc serve?
Riverside Mhp, Llc reports serving 120 people in Colorado, per its EPA record.
Has Riverside Mhp, Llc had any water quality violations?
The EPA has 85 violations on file for Riverside Mhp, Llc, of which 25 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.