Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Unaddressed | 2025-07-02 |
| RPT | Monitoring | Unaddressed | 2025-07-02 |
| Other | Monitoring | Unaddressed | 2025-07-01 |
| MR | Monitoring | Archived | 2023-01-01 → 2025-12-31 |
| MR | Monitoring | Archived | 2023-01-01 → 2025-12-31 |
| MR | Monitoring | Archived | 1986-09-01 → 1989-08-31 |
| MR | Monitoring | Archived | 1986-09-01 → 1989-08-31 |
| MR | Monitoring | Archived | 1986-09-01 → 1989-08-31 |
| MR | Monitoring | Archived | 1986-09-01 → 1989-08-31 |
| MR | Monitoring | Archived | 1986-09-01 → 1989-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Barium | 325.1 µg/L 16% of the EPA limit 2000 µg/L
worst single sample: 328 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 11.67 µg/L No EPA limit set
worst single sample: 12.3 µg/L | 3/4 | SYR4 | 2013–2019 |
| Chloroform | 13.56 µg/L No EPA limit set
worst single sample: 14.1 µg/L | 3/4 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 6.56 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 3/4 | SYR4 | 2013–2019 |
| Fluoride | 1226 µg/L 31% of the EPA limit 4000 µg/L
worst single sample: 1270 µg/L | 3/3 | SYR4 | 2012–2018 |
| TTHM | 35.06 µg/L 44% of the EPA limit 80 µg/L
worst single sample: 36.9 µg/L | 3/4 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 13.16 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 13.9 µg/L | 3/4 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.09 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 3/4 | SYR4 | 2013–2019 |
| Arsenic | 2.72675 µg/L 27% of the EPA limit 10 µg/L
worst single sample: 2.84 µg/L | 2/3 | SYR4 | 2012–2018 |
| Copper | 192.05 µg/L 15% of the EPA limit 1300 µg/L
worst single sample: 196 µg/L | 2/15 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.599 pCi/L 32% of the EPA limit 5 pCi/L
worst single sample: 1.64 pCi/L | 2/2 | SYR4 | 2014–2017 |
| Dibromochloromethane | 8.74 µg/L No EPA limit set
worst single sample: 9 µg/L | 2/4 | SYR4 | 2013–2019 |
| Bromoform | 1.5 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.9 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
35 contaminants tested, none detected
Utility contact
Frequently asked questions about Joppa
Is Joppa tap water safe to drink?
EPA monitoring detected 15 contaminants in Joppa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Joppa's water?
EPA monitoring detected Lead, Barium, Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Joppa serve?
Joppa reports serving 445 people in Illinois, per its EPA record.
Has Joppa had any water quality violations?
The EPA has 27 violations on file for Joppa, of which 0 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.