Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| TT | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| TT | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| TT | Health-based | Resolved | 2008-02-01 → 2008-02-29 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
| TT | Health-based | Resolved | 2008-01-01 → 2008-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 10.28 µg/L No EPA limit set
worst single sample: 10.9 µg/L | 53/53 | SYR4 | 2012–2019 |
| Chloroform | 76.82 µg/L No EPA limit set
worst single sample: 86.43 µg/L | 53/53 | SYR4 | 2012–2019 |
| TTHM | 88.18 µg/L 110% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 98 µg/L | 53/53 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 36.17 µg/L No EPA limit set
worst single sample: 42 µg/L | 52/53 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 66.12 µg/L 110% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 82 µg/L | 52/53 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 30.555 µg/L No EPA limit set
worst single sample: 40 µg/L | 52/53 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.3259 µg/L No EPA limit set
worst single sample: 1.558 µg/L | 39/53 | SYR4 | 2012–2019 |
| Copper | 132 µg/L 10% of the EPA limit 1300 µg/L
worst single sample: 200 µg/L | 30/30 | SYR4 | 2013–2019 |
| Nitrate | 3200 µg/L 32% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Monobromoacetic Acid | 19.185 µg/L No EPA limit set
worst single sample: 20.4 µg/L | 10/53 | SYR4 | 2012–2019 |
| Barium | 100 µg/L 5% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Fluoride | 993.9 µg/L 25% of the EPA limit 4000 µg/L
worst single sample: 1010 µg/L | 8/8 | SYR4 | 2012–2019 |
| Lead | 11.76 µg/L 78% of the EPA limit 15 µg/L
worst single sample: 15 µg/L | 7/30 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.452 µg/L No EPA limit set
worst single sample: 3.48 µg/L | 5/53 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.34275 pCi/L 27% of the EPA limit 5 pCi/L
worst single sample: 1.401 pCi/L | 2/3 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 840.5 µg/L 8.4% of the EPA limit 10000 µg/L
worst single sample: 860 µg/L | 2/2 | SYR4 | 2015–2018 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/8 | SYR4 | 2012–2019 |
| Atrazine | 0.5000 µg/L 17% of the EPA limit 3 µg/L | 1/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/53 | SYR4 | 2012–2019 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Blandinsville
Is Blandinsville tap water safe to drink?
EPA monitoring detected 20 contaminants in Blandinsville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Blandinsville's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Blandinsville serve?
Blandinsville reports serving 569 people in Illinois, per its EPA record.
Has Blandinsville had any water quality violations?
The EPA has 47 violations on file for Blandinsville, of which 34 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.