Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2020-07-01 → 2020-07-31 |
| MON | Monitoring | Resolved | 2020-07-01 → 2020-07-31 |
| MON | Monitoring | Resolved | 2020-07-01 → 2020-07-31 |
| MON | Monitoring | Resolved | 2020-07-01 → 2020-07-31 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 77.2 µg/L 5.9% of the EPA limit 1300 µg/L
worst single sample: 96 µg/L | 33/45 | SYR4 | 2013–2017 |
| Bromodichloromethane | 7.4455 µg/L No EPA limit set
worst single sample: 7.75 µg/L | 8/8 | SYR4 | 2013–2019 |
| Chloroform | 73.465 µg/L No EPA limit set
worst single sample: 74.2 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.69175 µg/L No EPA limit set
worst single sample: 2.019 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 36.46 µg/L No EPA limit set
worst single sample: 39.4 µg/L | 8/8 | SYR4 | 2013–2019 |
| TTHM | 81.785 µg/L 102% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 82.8 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 48.72 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 51.8 µg/L | 8/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.135 µg/L No EPA limit set
worst single sample: 10.6 µg/L | 7/8 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2023 |
| Monochloroacetic Acid | 3.617 µg/L No EPA limit set
worst single sample: 3.65 µg/L | 3/8 | SYR4 | 2013–2019 |
| Lead | 2.17 µg/L 14% of the EPA limit 15 µg/L
worst single sample: 2.2 µg/L | 2/45 | SYR4 | 2013–2017 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Easy Breeze Manufactured Home Park
Is Easy Breeze Manufactured Home Park tap water safe to drink?
EPA monitoring detected 11 contaminants in Easy Breeze Manufactured Home Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Easy Breeze Manufactured Home Park's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Easy Breeze Manufactured Home Park serve?
Easy Breeze Manufactured Home Park reports serving 108 people in North Carolina, per its EPA record.
Has Easy Breeze Manufactured Home Park had any water quality violations?
The EPA has 47 violations on file for Easy Breeze Manufactured Home Park, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.