Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-09-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-09-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-09-01 → 2012-09-30 |
| MCL | Health-based | Resolved | 2012-09-01 → 2012-09-30 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
| MCL | Health-based | Archived | 1996-07-01 → 1996-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 13.2 µg/L No EPA limit set
worst single sample: 15 µg/L | 71/71 | SYR4 | 2012–2019 |
| Chloroform | 26.55 µg/L No EPA limit set
worst single sample: 28 µg/L | 71/71 | SYR4 | 2012–2019 |
| TTHM | 45.7 µg/L 57% of the EPA limit 80 µg/L
worst single sample: 49.4 µg/L | 71/71 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.949 µg/L No EPA limit set
worst single sample: 7.86 µg/L | 70/71 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.72 µg/L No EPA limit set
worst single sample: 19.9 µg/L | 69/71 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 25.62 µg/L 43% of the EPA limit 60 µg/L
worst single sample: 37.6 µg/L | 69/71 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10.02 µg/L No EPA limit set
worst single sample: 12.3 µg/L | 69/71 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.5535 µg/L No EPA limit set
worst single sample: 1.61 µg/L | 34/71 | SYR4 | 2012–2019 |
| Lead | 0.0056 mg/L 37% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2025 |
| Dibromoacetic Acid | 1.86 µg/L No EPA limit set
worst single sample: 6.04 µg/L | 22/71 | SYR4 | 2012–2019 |
| Lead | 7.208 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 7.34 µg/L | 13/60 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 3.554 µg/L No EPA limit set
worst single sample: 3.71 µg/L | 5/71 | SYR4 | 2012–2019 |
| Copper | 137 µg/L 11% of the EPA limit 1300 µg/L | 1/60 | SYR4 | 2014–2017 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Melrose Park
Is Melrose Park tap water safe to drink?
EPA monitoring detected 13 contaminants in Melrose Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Melrose Park's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Melrose Park serve?
Melrose Park reports serving 24,206 people in Illinois, per its EPA record.
Has Melrose Park had any water quality violations?
The EPA has 93 violations on file for Melrose Park, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.