Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1994-12-01 → 1994-12-31 |
| MCL | Health-based | Archived | 1994-12-01 → 1994-12-31 |
| MCL | Health-based | Archived | 1994-12-01 → 1994-12-31 |
| MCL | Health-based | Archived | 1994-12-01 → 1994-12-31 |
| TT | Health-based | Resolved | 1994-07-01 |
| TT | Health-based | Resolved | 1993-12-17 |
| TT | Health-based | Resolved | 1993-01-01 |
| TT | Health-based | Resolved | 1993-01-01 |
| TT | Health-based | Resolved | 1993-01-01 |
| TT | Health-based | Resolved | 1993-01-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dichloroacetic Acid | 14.45 µg/L No EPA limit set
worst single sample: 15.8 µg/L | 27/27 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 27.17 µg/L 45% of the EPA limit 60 µg/L
worst single sample: 31.1 µg/L | 27/27 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10.375 µg/L No EPA limit set
worst single sample: 14.4 µg/L | 26/27 | SYR4 | 2012–2019 |
| Bromodichloromethane | 13.64 µg/L No EPA limit set
worst single sample: 14.5 µg/L | 23/23 | SYR4 | 2012–2019 |
| Chloroform | 25 µg/L No EPA limit set
worst single sample: 25.3 µg/L | 23/23 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.517 µg/L No EPA limit set
worst single sample: 7.77 µg/L | 23/23 | SYR4 | 2012–2019 |
| TTHM | 44.61 µg/L 56% of the EPA limit 80 µg/L
worst single sample: 46.1 µg/L | 23/23 | SYR4 | 2012–2019 |
| Lead | 0.0027 mg/L 18% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2024 |
| Monobromoacetic Acid | 2.026 µg/L No EPA limit set
worst single sample: 2.05 µg/L | 17/27 | SYR4 | 2012–2019 |
| Copper | 579.55 µg/L 45% of the EPA limit 1300 µg/L
worst single sample: 589 µg/L | 10/60 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.963 µg/L No EPA limit set
worst single sample: 2.05 µg/L | 7/27 | SYR4 | 2012–2019 |
| Lead | 10.175 µg/L 68% of the EPA limit 15 µg/L
worst single sample: 10.8 µg/L | 3/60 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 5.339 µg/L No EPA limit set
worst single sample: 5.42 µg/L | 2/27 | SYR4 | 2012–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Dixmoor
Is Dixmoor tap water safe to drink?
EPA monitoring detected 15 contaminants in Dixmoor's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Dixmoor's water?
EPA monitoring detected Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Dixmoor serve?
Dixmoor reports serving 2,973 people in Illinois, per its EPA record.
Has Dixmoor had any water quality violations?
The EPA has 164 violations on file for Dixmoor, of which 12 are health-based (a contaminant limit or required treatment was breached) and 9 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.