Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 620 µg/L 48% of the EPA limit 1300 µg/L
worst single sample: 1000 µg/L | 50/50 | SYR4 | 2012–2017 |
| Lead | 6.935 µg/L 46% of the EPA limit 15 µg/L
worst single sample: 7.9 µg/L | 22/50 | SYR4 | 2012–2017 |
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Bromodichloromethane | 4.0425 µg/L No EPA limit set
worst single sample: 4.62 µg/L | 8/8 | SYR4 | 2013–2019 |
| Chloroform | 2.40405 µg/L No EPA limit set
worst single sample: 2.83 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.8065 µg/L No EPA limit set
worst single sample: 2.81 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.319 µg/L No EPA limit set
worst single sample: 5.76 µg/L | 8/8 | SYR4 | 2013–2019 |
| TTHM | 14.029 µg/L 18% of the EPA limit 80 µg/L
worst single sample: 15.66 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.291 µg/L 5.5% of the EPA limit 60 µg/L
worst single sample: 3.55 µg/L | 8/8 | SYR4 | 2013–2019 |
| Bromoform | 2.4047 µg/L No EPA limit set
worst single sample: 2.45 µg/L | 7/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.57 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
33 contaminants tested, none detected
Utility contact
Frequently asked questions about Mendon
Is Mendon tap water safe to drink?
EPA monitoring detected 11 contaminants in Mendon's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mendon's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Mendon serve?
Mendon reports serving 953 people in Illinois, per its EPA record.
Has Mendon had any water quality violations?
The EPA has 31 violations on file for Mendon, of which 12 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.